The Planted Tank Forum banner

would i need to treat my tap water?

1.6K views 19 replies 14 participants last post by  astrosag  
#1 ·
ok so these are my water readings from my supplier:

Analysis Typical Value UK/EU limit Units
Hardness level very soft
Hardness Clarke 1.575 Clarke
Aluminium 9.58 200 µg Al/l
Calcium 7.85 mg Ca/l
Residual chlorine - Total 0.46 mg/l
Residual chlorine - Free 0.41 mg/l
Coliform bacteria 0 0 number/100ml
Colour <1.05 20 mg/l Pt/Co scale
Conductivity 63.7 2500 uS/cm at 20oC
Copper 0.0097 2 mg Cu/l
E.coli 0 0 number/100ml
Iron <7.43 200 µg Fe/l
Lead <0.235 25 µg Pb/l
Magnesium 0.938 mg Mg/l
Manganese <0.638 50 µg Mn/l
Nitrate 1.17 50 mg NO3/l
Sodium 4.93 200 mg Na/l

would i need to treat it to use in my tank?
 
#2 ·
Residual chlorine - Total 0.46 mg/l
Residual chlorine - Free 0.41 mg/l
This is what you need to remove from the water. It will kill fish. Any dechlorinator will work, as will letting the water sit out for a while to let the chlorine evaporate out. Works even quicker with an airstone running to help break the water surface and allow faster evap.
 
#9 ·
I always thought the reason for removing chlormine/cholrine is because it will kill the bacteria on the filter/plants/etc, not the fish itself. Many people keep simple fish bowls/betta bowls and just put tap water in and the fish is fine. Its the beneficial bacteria that a hit from any chlorine substance.
 
#3 ·
Also, if you're keeping shrimp, and maybe snails(I don't remember), you want to use something that can remove the copper in your water, as it is poisonous to inverts. I don't know if you can get it in the UK, but I use Prime brand water treatment. Has worked well for me thus far. One more thing, once you start with a product, you generally don't want to switch as you could have a nasty chemical reaction between the two compounds. Good luck and happy fishkeeping!
 
#6 ·
...in higher concentrations it can be harmful but you are fine at the reading you gave.
What would those higher concentrations be? I've only heard copper is bad, but never in what quantities.
 
#7 · (Edited)
Yes copper is bad for your tank and will harm your shrimps and plants. Iron is a safe element though, like bsmith said any dechlor is fine i use the cheapest kind and my tank has perfect parameters, i find a good balance for iron levels is a piece of terracotta as it is made of clay that is high in iron. Also your nitrite readings would be what i would be most worried about because that can be harmful to plants. but all of those other readings are fine.
 
#11 ·
I have a confession to make: I use untreated tap water on all of my tanks (20+). I have been keeping, breeding, and selling healthy fish for years. I also keep a multitude of plants, inverts, etc. I over filter so my bacteria never takes a hit large enough to alter water chemistry. sometimes I wonder if the small amount of chlorine helps kill algae? One could only hope I guess :)

Despite my practices, I can see that removing these things could potentially prevent health problems, or aid in maintaining a stable ecosystem. Im not a fan of unnecessary chems in my water, so if you can remove them without adding additional chems, Im all for it.
 
#18 ·
I like prime because it smells like satans toenails. And I can get it at my LFS if I run out, not sure about chloram-x or chloramine buster.. Do they also convert ammonia to ammonium and detox heavy metals? I'm not sure if it's necessary for me, since my water out of the tap is 20 ppm, low chloramine and pretty much as sweet as it can be.
 
#20 ·
Chlorine doesn't just kill bacteria but it also harms the fish...it burns their gills and will kill them in high enough quantities.

I think your readings are fine for fish....a lot of people don't even treat their water! I won't advise that - mainly to get rid of the chlorine/chloramine.

Most fish are actually pretty hardy.