The Planted Tank Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4,391 Posts
Discussion Starter · #1 ·
Hiya everyone. Last year I changed my flora to a low tech, little maintenance tank, and removed the co2 system from it. I don't see myself using it again on a nano tank, so I figured I would sell it to someone on the forums.

this is not one of the DIY systems, it does have a solenoid, and a decent valve on it. Its set at a working pressure of 25psi (I think) and is not adjustable. But it has worked very reliably for me.

I would suggest not putting it on anything larger than a 15 gal. (would be pushing it with a 20g tank), not that it would not work, but the amount of co2 it would go through would bring you to refilling the paintball tanks almost weekly. I did have it running on a 36g bowfront for a while and it was a pain to keep co2 tanks filled with that much water. I tested the solenoid a few min. ago and works just like it did when I purchased the system.

It is setup for paintball tanks. Which I am including two never been used 1 year old 20 oz. tanks with the system.

I am asking 100.00 for the whole thing. Send me a PM if your interested. I will try to get back to you ASAP.

I live in Thornton, and can meet somewhere within reason.

Wish I could give some plant trimmings with it, but... My 75g is still dry for the next couple weeks, and my flora only had crypts at the moment.

Here are a couple of pictures.
https://onedrive.live.com/redir?res...authkey=!APC1Tw73ou4go2Q&v=3&ithint=photo,jpg

https://onedrive.live.com/redir?res...authkey=!APGYEXNCkCvmzEY&v=3&ithint=photo,jpg

Thanks!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top