[jrman83]

This particular model, not so much. Very well known for end of tank dump as well as other issues. I have one that has operated flawlessly for about 3yrs and I have another that wiped out a small tank of fish. Only using the one that has never failed me. End of tank dump can be avoided my monitoring of your system and knowing when to stop and refill. You could buy worse models I believe.

Spend a little more maybe and build your own.

 

[jrman83]

Thanks for the responses! I have no problem checking up on it constantly as the big tank is currently running one of those little 45g disposable CO2 systems, that needs to be turned on/off by hand and is a real PITA. I may get it just for the ease of an easy first time system. I do think I could get all the parts for a dual stage regulator kit (just looking on ebay) for about $150-200, but putting it together is way outside of my skill level.

I feel what you're saying, but I don't think you would have issue. There are so many here that do it and are willing to help walk you through it. It is much easier than you think. I am in the middle of gathering parts to do my own.

 

[jrman83]

Even starting planted tanks is scary at first. There are leak test threads to walk you through to make sure your built reg. is good to go and what to do to correct. Its a leap of faith for yourself.

 

[jrman83]

Bubble counter is okay Needle valve sucks and my solenoids on my MA957s have not failed yet, so maybe they are okay also.