The Planted Tank Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
3,594 Posts
Discussion Starter · #1 · (Edited)
I have been trying the best I can to remove this fitting but it just would not come off. So, I decided to let it stay and find adapter that can be use with it.

Also, the display gauge is bent on the upper portion when I removed the existing stock. Is there a way to fix it?

This is a Radnor (Victor) Single Stage reg for my 5.5g tank. I like the size of it and goes well with my 2.5 lbs CO2 tank.

Thanks in advance.

Here are the photos.













Also, display gauges were bended when I removed the stock.
I tried to open the gauges by removing the screws at the back and pulled it upward. But, it seems there is a lock that holds it from the inside.

 

·
Premium Member
Joined
·
3,074 Posts
have to take out the extra piece; from the second look the fitting may be a flare connection port, for hydraulic pipe fittings.
and the reg is not a Victor, may be a rebranded Harris.


Edit:

Oops, it is a victor 150 series single stage.

Radnor is a re-branded, they also have re-branded Harris, so I made the mistake.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top