The Planted Tank Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
Hey guys,
any ideas on how to remove this properly without damaging the tank?.
It's only glued on one side as you can see below, but the space inbetween the glass and the plastic is very small (1mm)
Razor blades? Chemicals? Pull it real hard like a barbarian?

Wood Audio equipment Gadget Automotive exterior Electronic instrument
Wood Kitchen appliance Home appliance Gas Glass
 

·
Registered
Joined
·
335 Posts
"Pull it real hard like a barbarian? " Thanks for the chuckle!
Try and get a large putty knife back there. I have an older one that I put an edge on, and it works good for things like this. If you can detatch the top with the putty knife, you might be able to pop the bottom off without too much effort.
 
  • Like
Reactions: SpiderManBearPig

·
Registered
Joined
·
23 Posts
Discussion Starter · #5 ·
guitar string?
Didn't think of that, I'll give it a go

"Pull it real hard like a barbarian? " Thanks for the chuckle!
Try and get a large putty knife back there. I have an older one that I put an edge on, and it works good for things like this. If you can detatch the top with the putty knife, you might be able to pop the bottom off without too much effort.
Good idea, I'll try that as well if the guitar string is too weak.

Thanks guys !
 
1 - 5 of 5 Posts
Top