The Planted Tank Forum banner

High lights?

1449 8
What would be concidered high or very high lighting for a 20gal deep?
I have two 6500k bulbs on there now 20Watts ea 24" long.
1 - 9 of 9 Posts

·
Registered
Joined
·
1,113 Posts
Check Hoppy's light chart, it wiill depend on how good the ballasts are.
 

·
Registered
Joined
·
742 Posts
Discussion Starter · #5 ·
Also, how high is the light from the bottom of the tank? It'd probably be easier if you just linked us the fixture.
K from the bulbs to the substrate its about 16" and from bulbs to tank bottom as if it had no sub its about 19". The ballasts are cheap ones and there are no reflectors I do wanna put acrylic mirror so there's something there also upgrade the ballasts to a single ballast that will run both bulbs I know the transformers are no good for what I'm tring to do. My question is this what would I have to get for this to be concidered a high light tank? Thought the first question was clear enough. I know right now it's a low light the way it's set up. Here's pics of the light system.

http://i855.photobucket.com/albums/...0EC8575-2932-000005258A98E36C_zps59601e51.jpg


http://i855.photobucket.com/albums/...50852D2-2932-00000525863CE20B_zps78598bb1.jpg
 

·
Registered
Joined
·
6,866 Posts
What would be considered high or very high lighting for a 20gal deep?
I have two 6500k bulbs on there now 20Watts ea 24" long.
Hi newbieplanter,

Obviously you have two T12 bulbs over your tank. I am going to assume that you have about 2" of substrate and some sort of aluminum reflector behind the bulbs. If you have a 'standard 20H' (16.8" tall) I would estimate your PAR reading would be less than 30.......low light. If you have a 20XH (23.8" tall) I would estimate your PAR reading at less than 20.....low light.
 

·
Registered
Joined
·
742 Posts
Discussion Starter · #7 ·
Hi newbieplanter,

Obviously you have two T12 bulbs over your tank. I am going to assume that you have about 2" of substrate and some sort of aluminum reflector behind the bulbs. If you have a 'standard 20H' (16.8" tall) I would estimate your PAR reading would be less than 30.......low light. If you have a 20XH (23.8" tall) I would estimate your PAR reading at less than 20.....low light.

What bulbs would I have to get to make it a high light? I know I would have to go to T5s but how many bulbs,watts.
 

·
Registered
Joined
·
6,866 Posts
What bulbs would I have to get to make it a high light? I know I would have to go to T5s but how many bulbs,watts.
Hi newbieplanter,

Unless you are going to be injecting CO2 you don't want to exceed medium to medium/low light, about a PAR reading of 50 or less. A T5HO fixture with two (2) each 24 watt 6700K bulbs (48 watts total) would be about right for your needs. Hagen and Coralife both make them.

BTW, yes those are T12 bulbs with starters.....you don't see those anymore.
 

·
Registered
Joined
·
742 Posts
Discussion Starter · #9 ·
Hi newbieplanter,

Unless you are going to be injecting CO2 you don't want to exceed medium to medium/low light, about a PAR reading of 50 or less. A T5HO fixture with two (2) each 24 watt 6700K bulbs (48 watts total) would be about right for your needs. Hagen and Coralife both make them.

BTW, yes those are T12 bulbs with starters.....you don't see those anymore.
I'm getting the Co2 system this week Friday!
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top