The Planted Tank Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
752 Posts
Discussion Starter · #1 ·
So, talked with SMC and I have all the part numbers now but one, the adapter from the solenoid to the tubing.

I need to figure out the thread on the solenoid to be 100% sure I get the right part.

And googling isn't helping. lol





Any help is appreciated. :)

Sent from my XT1575 using Tapatalk
 

·
Registered
Joined
·
752 Posts
Discussion Starter · #2 ·
This is what was screwed into it originally, but I won't guarantee it was right.





Sent from my XT1575 using Tapatalk
 

·
Registered
Joined
·
13,079 Posts
ASCO coil..for 400 series solenoid
https://www.industrialstores.com/product_detail/asco-400115225d-coil-fb-120v-63-watts

Sure you want to use that solenoid? AC solenoids may eventually drive you crazy...

anyways it is probably here..
http://www.asco.com/ASCO Asset Libr...ubminiature-nsf-catalog.pdf#search=U8256A014V
1/4 or 1/8 NPT..

Better on but then you might as well go Clippard..
http://www.asco.com/ASCO Asset Library/asco-express-guide.pdf#search=400115
http://valvesandinstruments.com/asc...nf-3-2u.html?gclid=CKrOw_3r9csCFZWFaQod3oEB-A

10-32 so you need barbs for in line possibly.
24V DC and only 0.65W.. Normally closed.. 0-100psi rating
 

·
Registered
Joined
·
752 Posts
Discussion Starter · #4 ·
Going to stick with this one for now. I have two other regulators that are going to need solenoids so I will be researching those later.

I'm sure at this point it's 1/4" NPT so now to just find a hose connector for 1/4" NPT to 4/6 hose. :)

Sent from my XT1575 using Tapatalk
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top