[Gafi]

Hey everyone....so I have finally found the culprit of my CO2 leak....I have posted the picture below....it is leaking right where the arrow is pointing....any suggestions on how to seal this effectively?

 

[2in10]

You will need to either replace the valve or if you can find one the seating o-ring.

 

[JasonG75]

Plummers puddy?

 

[Gafi]

fixed it...unscrewed the bolt and put teflon tape on the male threads, sealed it right up....now the problem I am having is my bubble counter is leaking....it is leaking from the co2 tubing that connects to bubble counter from the CO2 tank.....suggestions for this?

 

[shiloh]

I'm guessing you're using paintball co2? What type of diffusion do you use? Because it sounds like the pressure in your system is very high.

 

[Gafi]

right now, using a ceramic bubble diffuser...and yea paintball co2

 

[Gafi]

should my ASA valve be completed tightened when running the system? I hit a PSI of just under 1000 on my gauge when my tank is 100% full

 

[Gafi]

problem solved....bubble counter=in the garbage....using the hagen ladder now as my reactor/diffusor/bubble counter....found that there were too many areas of high pressure...with the setup now, I have 0 leaks and great CO2 flow with the needle valve barely even open