The Planted Tank Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,154 Posts
Discussion Starter · #1 · (Edited)
Hi all,
Well most of my budget builds have been sold off already without me having to post a thread so now it's time for these beauties to be sold off!

Sorry for the crappy picts but I don't own a dslr :p

FITTINGS
1. Galvanized Zinc 90 degree 1/4" npt elbow - 2 dollars (1 available)
2. Nickel plated 90 degree 1/8" npt elbow- 3 dollars (1 available)
3. John Guest fitting 1/8 nptf x 1/4 tube od aectyl fitting rated for 150 psi- free (4 available)
4. nickel plated 1/8" npt x 10-32 bushing- 2 dollars (2 available)
5. nickel plated (SS teeth and SS 10-32 connection) 1/4 tube od x 10-32 push in fitting- 2 dollars (5 available)
6. Swagelok 1/4 npt x 1/4 tube od adapter (SS)- 7 dollars (1 available)
7. Nickel plated 10-32 elbow (male x female port)- 2 dollars (1 available)
8. Nickel plated 10-32 nipple (male x male ports)- 1 dollar (3 available)
9. Victor chrome plated 1/4" npt nipple (male x male ports)- 2 dollars (5 available)


Brass fittings:
1. 3" long 1/4" npt nipple- 2 dollars (1 available)
2. 1/8 npt coupler (female x female)- 1.50 dollars (1 available)
3. Swagelok B-405-2 (1/4 od x 1/8 id) tube insert- 1 dollar each (15 available)
4. 10-32 plug- 1 dollar (1 available)
5&6. 1/8 npt x 1/4 tube od push in fittings- 2 dollars (1 of each available)


Misc fittings/valves:
let me explain these first.... 1 and 2 are valves that can open and close the flow of gas. not precise enough for our needs.
3 and 4 are SS swagelok compression fittings but they are missing ferrules and nuts.
1 and 2 are 5 dollars each (1 comes with nipples if you'd like)
3 and 4 are 2 dollars each. (3 is 1/4 npt female x 1/4 tube od, 4 is 1/4 npt male x 1/4 tube od)


Also have glass inline bubble counters for 7 dollars each, 5 dollars if you buy something else from me

Regulators
All of these regulators are Victor HPT-500 these are compact regulators and have stainless steel diaphragms. Put simply, they are overkill for our use but very nice looking. They are the chromed versions of the SGT-500 which is a stainless steel regulator and coined the holy grail of all regulators.
Oh, and these valves are all overkill...
_____________________________________________________________
All regulators use high quality chromed cga 320 inlets and chromed/ss fittings!
They also come with the following: appropriate tube inserts, couple feet of co2 tubing, check valve, glass inline bubble counter, power adapter, washers, and a complete warranty



SS-22 w/ SS Burkert Solenoid
Swagelok/****** metering valve SS-22RF4 with vernier handle, very precise
2822 Burkert Solenoid. The leads have been covered with shrink tubing and comes with 24 vdc power adapter.



320 shipped with standard stuff up above in bold
_________________________________________________________________________
Parker H3 w/ SS Buerkert Solenoid
Parker Hannafin H3 metering valve, very precise and has a very nice handle mechanism
2822 Burkert Solenoid. The leads have been covered with shrink tubing and comes with 24 vdc power adapter.
1/4 tube od parker compression fitting



310 shipped with standard stuff up above in bold
_________________________________________________________________________
SS-21 w/ Clippard mouse
Swagelok/****** ss-21rf2 metering valve. Also super precise.
Clippard mouse, one of the best for our application because of low heat and reliability.
1/4 tube od parker compression fitting



300 shipped with standard stuff up above in bold
_________________________________________________________________________
Parker H3 valve w/ Clippard mouse
Parker Hannafin H3 metering valve, very precise and has a very nice handle mechanism
Clippard mouse, one of the best for our application because of low heat and reliability.
1/4 tube od parker compression fitting



290 shipped with standard stuff up above in bold (2 available)
_________________________________________________________________________
I also offer post body kits
plug and play! buy your own regulator and screw this on and you're good to go!
All chromed parts!
uses clippard mouse and SMC AS1200 needle valve.
65 shipped. (1 available)

SOLD

Solenoid
Clippard mouse solenoid with manifold and power adapter
40 dollars shipped.

Shipping for regulators is via usps priority medium flat rate
for fittings it'll be 3 dollars for FCM or 6 dollars for priority
 
1 - 1 of 1 Posts
Top