The Planted Tank Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello Everybody!

Well cutting a long story short, after receiving scratched Flora and then getting a complimentary Ebi, I have 2 tanks.
I'd been deliberating what to do with my Flora whilst waiting for its arrival, ranging from making a habitat for reptile/amphibians to making a nano reef tank, much like the 100L setup I own already.

Other than my reef tank which I've had running for about 8 months now, I have had no experience in aquatics but I make up for that with enthusiasm.

So far my intentions are to cultivate a neat little planted tank with some livestock.

boxes side by side


No scratches! yay


Polystyrene rockwork removed


On the shelf with lamps from both kits attached. You can see the glass lid with the gaps round the edge here and hole in the middle


I also have a 2nd hand Fluval 205 external filter on its way to me and have purchased a glass drop checker, in line bubble counter and a CO2 diffuser. I'll also be looking at some cheapish lilly pipes as the external is missing its inlet/outlets.

If anyone has experience fixing up a 205 to some lilly pipes, then I'd be glad to hear about it.

The Flora comes with the Fluval CO2 20 kit, which I'm hoping will serve its purposes until I see how successful this little tank becomes, but Ideas on how to upgrade it would be great. A solenoid perhaps?

Any advice at all about anything would be thankfully received :D
 

·
Registered
Joined
·
119 Posts
Hello Everybody!

Well cutting a long story short, after receiving scratched Flora and then getting a complimentary Ebi, I have 2 tanks.
I'd been deliberating what to do with my Flora whilst waiting for its arrival, ranging from making a habitat for reptile/amphibians to making a nano reef tank, much like the 100L setup I own already.

Other than my reef tank which I've had running for about 8 months now, I have had no experience in aquatics but I make up for that with enthusiasm.

So far my intentions are to cultivate a neat little planted tank with some livestock.

boxes side by side


No scratches! yay


Polystyrene rockwork removed


On the shelf with lamps from both kits attached. You can see the glass lid with the gaps round the edge here and hole in the middle


I also have a 2nd hand Fluval 205 external filter on its way to me and have purchased a glass drop checker, in line bubble counter and a CO2 diffuser. I'll also be looking at some cheapish lilly pipes as the external is missing its inlet/outlets.

If anyone has experience fixing up a 205 to some lilly pipes, then I'd be glad to hear about it.

The Flora comes with the Fluval CO2 20 kit, which I'm hoping will serve its purposes until I see how successful this little tank becomes, but Ideas on how to upgrade it would be great. A solenoid perhaps?

Any advice at all about anything would be thankfully received :D
You might have more luck asking in the equipment section about the lilly pipes and the Fluval 205. Let me know what you find out because I'm actually interested in doing that with my 105 as well!

As far as upgrading the Fluval C02 kit, I don't think you can modify it in any meaningful way and I've heard that they even us a custom threading on the C02 cartridges so you can't go pick up a box of 20 for $10 at Walmart.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
You might have more luck asking in the equipment section about the lilly pipes and the Fluval 205. Let me know what you find out because I'm actually interested in doing that with my 105 as well!

As far as upgrading the Fluval C02 kit, I don't think you can modify it in any meaningful way and I've heard that they even us a custom threading on the C02 cartridges so you can't go pick up a box of 20 for $10 at Walmart.
Thanks Bud,

i think I'm going to stick with the Fluval CO2 kit until it runs out, then see where to go from there.

As for the liliy pipes I've taken the lunge and ordered a 13mm set. 16mm hose fits fine on the fluval 205 and my plan is to get a 16-12mm connector (eheim do one) and then use some 12mm pipe to reach the lily pipes.

So my next step is to get some aquascaping materials :)
I have a pack each of the Fluval shrimp and plant stratum, so will mix them and use this as my substrate, unless anyone has a better idea that is?
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Done a doodle of the aquascape I've been pondering.

I'm going to go for a jungle look I think, using some stones and root as main features against a bank of the fluval substrate.



The planting style would be tall to the rear corner reducing in size toward the front, with ferns and mosses around the root and stones in the midground and a short carpet at the front.

I haven't a clue regarding plant species so helpful hints would be most welcome :)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top