The Planted Tank Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
743 Posts
Discussion Starter #1
got it run for a while then i dont see any tiny bubble or med bubble shootibg out from the out put, i thought i was on the right track right? NOT ,drop check keep changing color , PH dont drop , so did turn few more bubble 24hours later ,same thing. so i check again for leak ( even though i did check a few time before i think that i was set) com and found out the JBJ leak again .now bubble shooting out like crazy so i turn it down a few notch on my needle valve , now i got like tiny bubble shooting from my outlet, is that mean my co2 not dissolve enought yet? or im all good
thanks
 

·
Registered
Joined
·
1,694 Posts
When you hook it up you went in on Top of the Reactor and out at the bottom too the tank right? What are you using a filter or a close loop pump. I have always use a close loop for my DIY Reactor with a Mag 3 and change over to a Mag 5 with good co2 mix without any micro bubbles besides the periling on my plants.
 
1 - 2 of 2 Posts
Top