The Planted Tank Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
315 Posts
Discussion Starter · #1 ·
Hello all,

I'm a big fan of the DIY things and I didn't want to pay for the Python water changer, so I decided to build my own. Picture is below of my setup.

I'm having trouble with it because it is not working lol. with both valves open, it is supposed to create a suction with the water turned on. Well, it doesn't create a suction, it actually pushes water through the hose.

the only thing I can come up with is that it has something to do with the Y connector. I read a thread on another forum that used a Y connector so I thought it would work.

I want to go try to find a T type connecter like the one on the python.

Just wondering if anyone has tried this and/or ran into this problem with the Y connector?


The hose that goes to the tank is 5/8 inch. Maybe this hose needs to be smaller?


Looking at the picture now, it doesn't make sense how it would create a suction so maybe it is the Y connector. I don't know...


I'm going to keep researching, but If anyone has any experience with this or successfully building a DIY python type water changer, I would love to hear from you. Thanks!
 

Attachments

·
Registered
Joined
·
315 Posts
Discussion Starter · #3 ·
If you can find a waterbed filler or whatever it is called that is the part you need. I believe these things are called venturi valves. The Y and T will do nothing without that valve.
Okay I see. I'm guessing it is some sort of check valve type thing... I'll try to find one at a department store close by. If not, I guess I'll be ordering from Ebay.
 

·
Registered
Joined
·
315 Posts
Discussion Starter · #5 ·
So I called around and found a furniture store that sold the water bed kit for 8 dollars. It is plastic and super cheap, but at least I can see how it works and it does work. I just don't know how long it will last because it is cheap plastic.
 

·
Registered
Joined
·
315 Posts
Discussion Starter · #7 ·
I know the feeling my aqueon water changer kept breaking because of my insane water pressure. I went out and bought a python and that isn't much better. If yours breaks, at least it was cheap :D
ya I'm glad it was cheap, cheaper online though. The threads are not going to last, but I will figure something out by the time they do. Now that I know how it works I can try to build a metal one.

I could probably silicone the top brass piece to the plastic part; might extend the life of it.
 

Attachments

·
Registered
Joined
·
315 Posts
Discussion Starter · #9 ·
This is what my DIY Python looks like.

I was having all sorts of problems with the plastic one leaking and squirting high pressure water all over the room.
In the plastic one. there is this little extension within the part that extends past the hole that you would connect the hose too. Does your metal one have something similar? Or is this not necessary?
 

Attachments

·
Registered
Joined
·
315 Posts
Discussion Starter · #12 ·
I connect mine to the basement sink and just let it siphon the water out so I have no need for that part. But I can think of two ways add it.

First is to just take the part from the Python and whittle it down enough to fit in my DIY model. Second is to find a brass washer to fit in the top of the DIY model and then solder a tiny brass tube through the center hole of the washer that is the length of Python part. The tubing should be available at any hobby shop.
I don't have a soldering kit, but have always wanted one for projects. I think it wouldn't be that hard to build this like you said with a washer and a brass tube through the center.

I don't mind running the hose out the door for draining and then hooking it up to the sink to fill it up though.

Thats nice you have a basement sink to hook your hose to, you don't need to worry about the sink creating suction because it is lower.
 

·
Registered
Joined
·
315 Posts
Discussion Starter · #14 ·
Unless I am misreading that, why not just go with a normal gravel vac on a hose then? They make ones that are self priming.
The self priming thing is not really an issue here. I was just saying draining out the door isn't that big of a deal and would work fine instead of using the suction from the sink with this type of system.
 
1 - 7 of 7 Posts
Top