The Planted Tank Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter · #1 ·
Hi guys,
I was going to go with a small scale CO2 set up but after reading I think I would rather go with a larger bottle/reg and have it last for a while. Possibly down the road adding a tank as well to connect to it.

I was looking at this regulator...
http://www.midwestsupplies.com/cornelius-dual-gauge-regulator-w-1-4-mfl-ball-check-valve.html
Needle Valve
http://store.fabco-air.com/proddetail.php?prod=NV-55-18
And then looking for a solenoid. Anyone have an recommendations?

The only other item I would need is a solenoid. Can anyone point me in the right direction for this?

I already have a bubble counter and check valve so those will not have to be built in.

Thanks in advance!

-Dave
 

·
Premium Member
Joined
·
1,533 Posts
Hi guys,
I was going to go with a small scale CO2 set up but after reading I think I would rather go with a larger bottle/reg and have it last for a while. Possibly down the road adding a tank as well to connect to it.

I was looking at this regulator...
http://www.midwestsupplies.com/cornelius-dual-gauge-regulator-w-1-4-mfl-ball-check-valve.html
Needle Valve
http://store.fabco-air.com/proddetail.php?prod=NV-55-18
And then looking for a solenoid. Anyone have an recommendations?

The only other item I would need is a solenoid. Can anyone point me in the right direction for this?

I already have a bubble counter and check valve so those will not have to be built in.

Thanks in advance!

-Dave
Are you talking about adding a bottle of yeast/co2 mixture to all this equipment?
 

·
Registered
Joined
·
3,578 Posts
In your title it says DIY CO2 build so I was thinking 2 ways 1 was the way Higher Thinking(or I think) was as in a DIY CO2 mix or the 2nd was this a DIY CO2 regulator build.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top