The Planted Tank Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13,187 Posts
What can i get that isnt bml brand for my xb bml lights. Solunar is dead and im desperate since i cant use the lights without a dimmer.

Bump:
They use inventronics drivers..early models may be Meanwell..
Should be fairly easy to figure it out.. Image below uses an invertronics number for cross reference.
Should (may) work w/ a 10k pot...
Def works w/ 0-10V dimming..


http://forum.buildmyled.com/index.php?attachments/dimming-connector-jpg.7/

I know automated is the final answer.. but manual should be a piece of cake.
http://www.inventronics-co.com/upload/LUC-040SxxxDSF_2015010906331664011.PDF

Heck a lithium battery applied to the dim circuit will cut output over 50%..

Probably want a current limiting resistor in there though..

9V battery and 10k pot should work as well..

If you don't get an apex or bluetooth (not mini) or any other 10v dim controller..
Any PWM one can be modded w/ a little add on board such as this:

http://www.airyear.com/maitech-pwm-...4.html?zenid=9801a96440a4e94dccb1802a188d6d70

Converting the 0-10v signal from an APEX to a PWM signal - Reef Central Online Community
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top