The Planted Tank Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
I hope this isn't a really dumb question, but I bought one of these things and have no idea how to set it up. Does anyone else own this? The instructions are in Japanese and Engrish.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=015&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=250111060939&rd=1&rd=1

From the auction:

# To setup: Fill the counter with water
# Connect the Co2 tubing to the inlet of the counter
# Co2 gas from the pipe will create bubbles in the water
# Count the number of bubbles per second to make calculation
# Rhinox counter can be placed outside the tank. Use the suction cups to attach it on the wall of the aquarium.

The problem is that the openings for the airline are too large in diameter for the airline tubing to fit over them.

Umm... am I missing something?
 

·
Registered
Joined
·
1,981 Posts
Try putting the end of your airline in boiling water, then press it on really quick. You can force most hoses/tubing onto larger barbs this way. If you are using regular silcone tubing, be aware that it will lose some gas through the tube wall.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top