[sjb1987]

I have the top plate sealed on the wet dry side but do I seal the 3 holes that are halfway down on the inside facing the pump side as well

 

[HD Blazingwolf]

i did

put tape on one side and squeeze silicone in. wipe smooth with finger.. let dry 24 hours
pull tape off smoothly and ur done

 

[sjb1987]

Ok sounds like a plan

 

[HD Blazingwolf]

If ur feeling lazy u can just use tape. I would put it on the inside of the wet/dry area as when the pressure builds itll stay put instead of being pushed out