The Planted Tank Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter · #1 ·
i need a co2 reg asap the old milwaukee took a dump on me anybody got a used one they dont need anymore of know where i can get one rather cheap..the face blew my secondary valve...can it be replaced and be good to go..
 

·
Registered
Joined
·
101 Posts
Discussion Starter · #3 ·
For a quick fix, you can get a replacement gauge:

http://beverageequipmentco.com/BEC_Co2_regulators__parts.htm
http://www.kegkits.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=GAUG

Not sure about shipping. And you might need a 1/8 to 1/4 bushing.
yes gauge is what i ment..its the secondary pressure one...as far as i know thats all thats wrong...one day i noticed that t the pressure was way above the 10psi suggested...like to 30 40 so i turned off bottle turned open reg all the way open bubble counter dump.out all pressure close counter reg still all the way out open bottle..boom im broke leaking ..turn bottle back off..

so i can replace just gauge..and it will stop purging out the left side
 

·
Registered
Joined
·
1,154 Posts
i dont think thats your only problem.... a blown gauge doesnt neccessarily mean it'll leak. you wont be able to read the pressure yes, but otherwise the rig should still work. where i the gas leakin from? the pressure relief valve? did you open up the main body with all the diagphrams and stuff?
 
1 - 5 of 5 Posts
Top