The Planted Tank Forum banner
1 - 20 of 22 Posts

·
Registered
Joined
·
1,319 Posts
Discussion Starter · #1 ·
I'm in the process of getting a 20 long. I would like to divide it to keep multiple male bettas. My Austin is what do you guys use to divide the tanks.

My requirements are

1) it must be able to let water pass through
2) has to keep the bettas from seeing eachother

Thanks for all your help!
 

·
Registered
Joined
·
63 Posts
I would just buy a piece of acrylic and drill holes or route out spaces for flow, Similar to good sump baffles, It's cheap and very quick and easy to do.
 

·
Registered
Joined
·
1,393 Posts
I used plastic Canvas, the kind you get to make cross stitching. comes in variety of colors, and sizes. You can silicone it, and if you want to remove it just a little razor blade. That's what the above picture is of, you can also use slip cover binders to hold the plastic up.
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top