New Tank Build 85Gal Rimless. - The Planted Tank Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 31 (permalink) Old 09-15-2014, 02:52 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
New Tank Build 85Gal Rimless.

Hey Guys,
I am looking to custom make a rimless tank, 54X22HX18W.
There will be a 5'' overflow chamber on the left side making the tank 48'' usable area.
There is a glass shop in my area that is willing to cut all glass for me and i will get it together myself. I have never done a build myself but got a whole garage and a ton of tools and help. I had a quote from an aquarium shop at around $3K for the tank only. I cannot afford that.

Anyways I am looking at around $1200 for all the glass cut, polished, holes drilled and all that. All glass except the bottom is low iron starfire.

The questions for you guys i have are:

1. What do you think the glass thickness should be for given size.
The guy swears by 12mm (1/2 inch) and can temper all the glass for me at no cost. Since I've never seen a tank with tempered glass (except bottom) it raised a question. What are the pros/ cons of tempered. Is the glass thickness OK? Will tempering affect viewing under light?. The tank will be used for freshwater planted.

2. Does it really matter if side glass goes on top of the bottom glass or it can be glued to the side of the bottom glass making the build much easier since there has to be a 1/16 inch gap between the glass.

3. I am planning to use
GE 1200 Series Construction Silicone Sealant - Clear
From Amazon.

What do you guys think?
Any suggestions are highly appreciated.
The front view plan is attached.
Attached Thumbnails
Click image for larger version

Name:	Front.png
Views:	99
Size:	10.5 KB
ID:	371713  


Last edited by rectangle_nyc; 09-18-2014 at 02:45 PM. Reason: Updated Size
rectangle_nyc is offline  
Sponsored Links
Advertisement
 
post #2 of 31 (permalink) Old 09-15-2014, 03:15 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
Use this thread as a guide.
https://www.plantedtank.net/forums/sh...961&highlight=

For silicone use nothing less than RTV108 since this is your first time.
gus6464 is offline  
post #3 of 31 (permalink) Old 09-15-2014, 03:25 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
Thanks, I've seen this thread. It is not clear on glass positioning. Did he put front on the bottom or on the side. As for silicone i thought GE was better. How RTV 108 is better than GE? Cure time?

Last edited by rectangle_nyc; 09-15-2014 at 03:46 PM. Reason: Mistake
rectangle_nyc is offline  
 
post #4 of 31 (permalink) Old 09-15-2014, 03:45 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
Quote:
Originally Posted by rectangle_nyc View Post
Thanks, I've seen this thread. It is not clear on glass positioning. Did he put front on the bottom or on the side. As for silicone i thought GE was better. How RVT 108 is better than GE? Cure time?
It's a floating bottom so all the sides are not sitting on top of the glass but beside it.

As far as the silicone every big tank build like I have seen has used the RTV.
gus6464 is offline  
post #5 of 31 (permalink) Old 09-15-2014, 04:00 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
Thanks, That makes perfect sense now because floating bottom is easier to build (I think).
I guess it really does not matter in tums of the strength of the tank.
As for silicone, I will gladly take your advise and change my build plans for RVT 108. I also see a lot of builds using it.

Any suggestion(s) on should i temper all the glass?
rectangle_nyc is offline  
post #6 of 31 (permalink) Old 09-15-2014, 04:19 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
Quote:
Originally Posted by rectangle_nyc View Post
Thanks, That makes perfect sense now because floating bottom is easier to build (I think).
I guess it really does not matter in tums of the strength of the tank.
As for silicone, I will gladly take your advise and change my build plans for RVT 108. I also see a lot of builds using it.

Any suggestion(s) on should i temper all the glass?
Tempered glass is tricky because you can't drill it. Since you are doing an overflow you definitely can't use tempered on the side with the overflow holes.

Unless the glass builder can temper the glass after the overflow holes have been cut? If he can do that then I would definitely go that route as you will have a super strong tank that way. If you do it this way though make sure you get the hole placement right the first time as you will no longer be able to cut holes in it afterwards.

What type of overflow are you thinking?

Floating bottom allows for less pressure on the bottom glass which is a good thing. All my rimless tanks and every ADA and Mr. Aqua I have seen all use floating bottom.
gus6464 is offline  
post #7 of 31 (permalink) Old 09-15-2014, 04:41 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
This tank is my wife's design. If this were me designing it I would definitely go wider (not taller or longer). But the space in our house is limited so the decision was made to make it taller and longer and have 5 inch overflow box on the side. The overflow panel will be sandblasted glass so that the plumbing is not visible. Just plane ½ thick polished edge panel. There will be 4 holes on the bottom pane (3 drains) 2 main, 1 emergency and 1 hole closer to the back that I am hoping to “elbow” from pvc into a tank with a glass (1 ½) or so tube. The idea is to have a glass spray bar. That if I would be able to drill glass tubing and find an end cap for it.

Bump: I am not an engineer but do have some technical knowledge. And it seems to me that floating bottom is less safe unless I am wrong. I sketched it (attached) and it seems that in floating bottom silicone seam has to work 2 ways (down and outward) where in regular bottom only outward. Or am I wrong?

Bump: The holes will be all drilled. All tested and after will be sent to kiln for tempering.
Attached Thumbnails
Click image for larger version

Name:	Glass.jpg
Views:	101
Size:	51.7 KB
ID:	371721  

Click image for larger version

Name:	Sides.jpg
Views:	91
Size:	64.3 KB
ID:	371729  

Click image for larger version

Name:	Floating.png
Views:	90
Size:	14.8 KB
ID:	371737  


Last edited by rectangle_nyc; 09-18-2014 at 02:47 PM. Reason: Updated size
rectangle_nyc is offline  
post #8 of 31 (permalink) Old 09-15-2014, 05:00 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
I heard good and bad things about tempered glass. Trying to weigh in the pros and cons. Like I said the guy is willing to do it for free. My problem with tempered is that it might degrade visual effects of star fire. Polarization? Transparency? Imperfections etc…
rectangle_nyc is offline  
post #9 of 31 (permalink) Old 09-15-2014, 05:18 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
A glass that size will be heavy. By laying it on top of the bottom you will be putting considerably more pressure on the ends which might crack the glass if the surface you are laying it on is not completely even.

Using silicone of this strength you have to worry more about the glass cracking than the silicone breaking down and creating a a leak.

I am not sure if tempering starphire will make it look less clear. That is something I would ask the glass maker. All starphire glass tanks I have seen are all non-tempered including mine.
gus6464 is offline  
post #10 of 31 (permalink) Old 09-15-2014, 05:43 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
Quote:
Originally Posted by gus6464 View Post
A glass that size will be heavy. By laying it on top of the bottom you will be putting considerably more pressure on the ends which might crack the glass if the surface you are laying it on is not completely even.
Using silicone of this strength you have to worry more about the glass cracking than the silicone breaking down and creating a a leak.

I guess in the case of floating bottom the tank has to 'sit' on a solid surface like a granite counter top where warp is not an option.

Last edited by rectangle_nyc; 09-18-2014 at 05:02 PM. Reason: Change
rectangle_nyc is offline  
post #11 of 31 (permalink) Old 09-15-2014, 06:04 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
[quote=rectangle_nyc;6678553]
Quote:
Originally Posted by gus6464 View Post
A glass that size will be heavy. By laying it on top of the bottom you will be putting considerably more pressure on the ends which might crack the glass if the surface you are laying it on is not completely even.

Using silicone of this strength you have to worry more about the glass cracking than the silicone breaking down and creating a a leak.

I guess in the case of floating bottom the tank has to 'sit' on a solid surface like a granite counter top where warp is not an option.
Other way around. Floating bottom the surface is less forgiving than laying the sides on top of the bottom.
gus6464 is offline  
post #12 of 31 (permalink) Old 09-15-2014, 06:25 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
So what is safely used under a floating bottom?
rectangle_nyc is offline  
post #13 of 31 (permalink) Old 09-15-2014, 11:42 PM
Planted Tank Guru
 
PTrader: (7/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 2,402
Quote:
Originally Posted by rectangle_nyc View Post
So what is safely used under a floating bottom?
Any type of mat. Yoga mat works well and it's what I use on my tanks.
gus6464 is offline  
post #14 of 31 (permalink) Old 09-16-2014, 02:55 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
Thanks. Again.
There is an update the glass thickness is changed from 1/2 to 3/4 not tempered. I am going to order the glass tomorrow. Will let you guys posted.
Thanks.
rectangle_nyc is offline  
post #15 of 31 (permalink) Old 09-16-2014, 11:39 PM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Aug 2014
Location: usa
Posts: 26
Today I've ordered the glass. Decided to be safe and ordered 3/4 thickness.
All sides starphire not tempered. Bottom is regular glass also 3/4. Not sure if i want to temper the bottom yet. What do you guys think?

It will take about 3-4 weeks to compete.

Overflow panel will be cut out of 3/8 acid glass. Apparently sandblasted (my original idea) glass does not look good in water at all.

3/4 starphire came with a price tag but looks so much clearer compared to regular glass. $300 difference i think was totally worth it.
rectangle_nyc is offline  
Reply

Tags
85gal, new tank build, rimless.

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome