The lighting is from 2 AquaticLife T5 fixtures that have 3 built in timers for 2 different sets of bulbs (daylight and actinic for reef tanks) and LED moonlights. The actinic bulbs have been replaced with 6700K bulbs.
The filter is a Marineland 350 Pro canister filter with a Hydor in line heater. The output from the filter, after passing through the in-line heater, is directed to one tank at a time using a SCWD therefore creating an alternating flow through the fish bridge. The fish bridge is made from 2" square tubing, cut at each end on a 45 degree angle, then glued back together forming a u shaped tube 40" long with 8" downtubes going in to each tank.
I'll have some pics to post later today with what I've done so far. The hardscape of the bigger of the 2 tanks is essentially done. The tube is done. I will be starting on the aquascaping of the 2nd tank in the next day or so.
Last edited by fishbreath; 11-29-2009 at 12:21 AM.