Duzzy's 130ltr (32gallon) Planted Journal (update 24/2) - The Planted Tank Forum
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 02-14-2008, 04:41 AM Thread Starter
Guest
 
PTrader: (0/0%)
Join Date: Feb 2008
Posts: 317
Duzzy's 130ltr (32gallon) Planted Journal (update 24/2)

G'day,

this is my first attempt at a full on planted tank. For a bit of history: my wife and I started like I am guessing everyone else did the standard kit with as many different types of fish as we could safely cram in, an ornament and some plants plonked here and there, we made some errors along the way too like putting in a half dozen angels and not knowing why they started dying off (overloading the biological filter) watching neons slowly disappear not realizing they were bite sized snacks for the angels the survived and grew. As time went on we gradually got some smarts and decided that angels were the fish for us and thats what we aim to keep in this tank, that and some rummy nose tetras and something in the clean up crew like sucker cats or a bristle nose pleco. During our learning curve we found a plant that for whatever reason we could not kill and had it thriving in our tank, Anubias planted with the rhizome deep in the gravel and they thrived they are a plant we love to look at and also being so tough they too will be in this tank .

Our tank is an aquaone 620T :600mm wide x 380cm deep x 600mm tall holding around 130litres (32 US Gallons)

Substrate: Aqua clay ground mixed with small amount of gravel mainly for depth and bulk

Solid Decoration's: Mopani drift wood Stones

Lighting: this week or next will be replacing the 40 watts of flouros with a T5 3x24w High output light that gives me .55 watts per liter or 2.25 watts per gallon

here is the light
http://cgi.ebay.com.au/T5-AQUARIUM-O...QQcmdZViewItem

Fertalising: The only part of this I have thought about is the DIY CO2 will be added

Plants wish list:

Glossostigma elatinoides
Eleocharis parvula Hair Grass
Echinodorus tenellus Pygmy chain sword
Weeping moss
Christmas moss

Hydrocotyle verticillata Whorled/Marsh Pennywort
Microsorum pteropus 'Windelov' Java Fern (Crested Jave Fern)
Anubias afzelii
Anubias Nano
Didiplis diandra Blood star grass

Microsorum pteropus Java Fern
Anubias barteri Giant Anubias
Anubias barteri 'coffeefolia' Coffee Leaf Anubias
Lobelia cardinalis

Crinson sails amazon sword
Blyxa echinosperma Bamboo Plant
Myriophyllum aquaticum Brazilian Millfoil
Myriophyllum matogrossensis Red Stem Millfoil
Myriophyllum hippuroides Western Millfoil

Any way will keep adding post and pics as I go......

Regards Darren

Last edited by duzzy; 02-22-2008 at 04:59 PM. Reason: pic
duzzy is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 02-16-2008, 05:24 AM Thread Starter
Guest
 
PTrader: (0/0%)
Join Date: Feb 2008
Posts: 317
G'day all,

tank was filled today, and now for the fun bit plants and fish. I decided to use thin black elastic to attach plants, went and looked and my drawing as to where I may want things and put the black elastic in place now so all I have to do is lift it and put the plants in place. Used 100% tank/rain water to fill. I hope to order the lights this week and will get some val and start my co2 going just a small bottle of DIY then will start adding plants as they arrive. But I have to cut my plant list down even though light shouldnt be an issue. I was going amazon but I just like to many other plants lol oh well here are some pics of the filled tank and finished hardscape. The second picture just showing one of the 20 spots I have elastic just in case I want to stick a plant there you have to look to spot it (other than the bit on the rock) and if I dont need them I can cut them off. Will also attach the black lami panel this week to the back of the tank....

Regards Darren



duzzy is offline  
post #3 of 5 (permalink) Old 02-16-2008, 08:37 PM Thread Starter
Guest
 
PTrader: (0/0%)
Join Date: Feb 2008
Posts: 317
thanks but what I ended up doing is shown above


duzzy is offline  
 
post #4 of 5 (permalink) Old 02-20-2008, 03:53 AM Thread Starter
Guest
 
PTrader: (0/0%)
Join Date: Feb 2008
Posts: 317
Re: Duzzy's 130ltr Planted Tank Journal (update)

G'day all,

decided to get my first plants today and build and install my co2 system, there is also a shot of how I planted out out and what I used to wiegh plants down. Comments welcome

Darren

Co2 Reactor



Co2 manufacturing plant :-p



Weighing down plants



Updated tank pic, unsure of plants position yet but will decide over the next few days
duzzy is offline  
post #5 of 5 (permalink) Old 02-22-2008, 05:00 PM Thread Starter
Guest
 
PTrader: (0/0%)
Join Date: Feb 2008
Posts: 317
Hi there,

having read a great deal and researched a great deal I built my CO2 factory, reactor and a on/off switch for when the lights are out. I don't know if that parts been done before but here they are



Ok so here comes the explanation. The CO2 Generator part is pretty standard, 2x2lt bottles I used cordial bottles I found the plastic to be stiffer than coke bottles or the like and the lids are about 2cm wider than coke bottles. That then runs into a gas separator to catch any discharge from the yeast stuff for that I used a 375ml coke bottle. All holes were drilled to the diameter of inside the tubing then cut on an angle pulled through with pliers to make air tight seals (no glue required).

Now this is where it gets different, I had read that co2 was not meant to really be used at night in the tank so decided to come up with a way to turn it off at night and have and its very successful so far. Because the co2 straight into the air would smell the house out, I use water to filter it before releasing.

1. For this chamber I used a tank gravel vacuum you will need to go to the hardware store and get a tight fitting cap and glue it to the other end of the clear tube (make sure the pointy end comes of if not you will need a second tight fitting cap but do not glue the second one.

2. Drill a hole in the pointed end cap to feed air line all the way to the bottom of the clear tube.

3. Fill with water until it is 2 inches from the top.

4. Put the cap on and you are done the open hole is the co2 gas outlet over night

Ok tubing to the tank. The tube coming out of the reactor needs to be cut and the middle part of a t piece inserted. Now cut 2 x 5cm pieces of tube push them onto the other 2 parts of the T

Now going from the t to the tank you need an airline tap and if you chose a valve but the tap goes between the t and the valve.

Now between the t and the co2 filter place another tap.

Ok when the lights are off you open the tap near the co2 filter and close the other one and in daylight vice versa

Below are some pictures. My reactor is a small powerhead and a baby bottle :-) Hope this helps some one.

Regards Darren



duzzy is offline  
Reply

Tags
None

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome