Rexolin CXK - The Planted Tank Forum
 
LinkBack Thread Tools Display Modes
post #1 of 14 (permalink) Old 06-22-2015, 02:05 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Question Rexolin CXK

Hi,
Please help me!
I have Rexolin CXK.
My tank is 2'x1'x1' Low Tech no CO2 dieted planted tank.
Can I Rexolin CXK ?
If YES,how to make the mixture and what should be dosing amount ?
iAquarist is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 06-22-2015, 02:36 AM
Planted Tank Guru
 
Zorfox's Avatar
 
PTrader: (5/100%)
Join Date: Jun 2012
Location: Gainesville, FL
Posts: 2,105
I would personally not use it. It seems too high in boron, manganese, Zinc and copper for a planted tank. Below is a comparison of Plantex and Rexolin. Plantex has been widely used without problems. Rexolin? Never heard of it. Copper levels greater than 0.03 ppm have been shown to cause issues with sensitive creatures such as shrimp.

Code:
Plantex CSM +B

B		0.0613
Cu		0.0069
dGH		0.0896
Fe		0.5
Mg		0.1072
Mn		0.1432
Mo		0.0038
Zn		0.0283


Rexolin CXK

B		0.2206
Cu		0.0735
Fe		0.5
Mg		0.1765
Mn		0.4706
Mo		0.0074
Zn		0.6176
Zorfox is offline  
post #3 of 14 (permalink) Old 06-22-2015, 11:42 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Thanks for ur reply!
Following is written on the pack :

Zn 4.2%
Fe 3.4%
Mn 3.2%
B 1.5%
Mg 1.2%
Cu 0.5%
Mo 0.05%
iAquarist is offline  
 
post #4 of 14 (permalink) Old 06-22-2015, 06:06 PM
Planted Tank Guru
 
PTrader: (3/100%)
Join Date: Aug 2014
Location: Maryland, USA
Posts: 2,339
Those numbers are consistent with the results Zorofox got, at least in terms of ratio...

It seems really strange that there's almost half as much boron as iron... that doesn't really reflect any plant usage ratio I'm aware of and boron can be quite toxic to plant life in all but trace amounts. Maybe it is designed for use on soil that is already high in iron???

New to planted tanks, avid gardener/tinkerer.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Fluval C4 + Quietflow 30, Finnex Planted+ with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, low-tech.
10 gallon secondary tank with Finnex stingray with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, AC20, low tech
mattinmd is offline  
post #5 of 14 (permalink) Old 06-22-2015, 11:38 PM
Planted Tank Guru
 
Zorfox's Avatar
 
PTrader: (5/100%)
Join Date: Jun 2012
Location: Gainesville, FL
Posts: 2,105
The numbers I listed were an average single EI dose comparison.

The actual fertilizer percentages are this...


Code:
Plantex CSM +B		Rexolin CXK

Fe 6.53%		Fe 3.4%
Mn 1.87%		Mn 3.2%		
Cu 0.09%		Cu 0.5%
Mg 1.4%			Mg 1.2%
Zn 0.37%		Zn 4.2%
Mo 0.05%		Mo 0.05%
B  0.8%			B  1.5%
Still far too much Zinc, Manganese and especially Copper for a Planted tank IMO.
Zorfox is offline  
post #6 of 14 (permalink) Old 06-23-2015, 12:54 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Thanks!
Then I thing I should stay safe and should avoid this.
May be I will use it on my garden soil then.
iAquarist is offline  
post #7 of 14 (permalink) Old 06-29-2015, 01:59 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Can I start EI dosing in my tank ?
My tank is low tech and without CO2.
Problem is I can't afford any water test kit and weight machine to measure chemicals.
What are the min chemicals required to start EI dosing ?
How to calculate amount of dosing ?
Water using in tank is hard water.
Recently facing thread algae problem.
Light on for 2x2 hours per day 36Watt PLL.
30% weekly water change.
iAquarist is offline  
post #8 of 14 (permalink) Old 06-29-2015, 12:04 PM
Planted Tank Guru
 
PTrader: (3/100%)
Join Date: Aug 2014
Location: Maryland, USA
Posts: 2,339
Use the EI low light dosing regime in low tech tanks. You can use the calculator at http://yanc.rotalabutterfly.com to compute dosing.

New to planted tanks, avid gardener/tinkerer.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Fluval C4 + Quietflow 30, Finnex Planted+ with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, low-tech.
10 gallon secondary tank with Finnex stingray with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, AC20, low tech
mattinmd is offline  
post #9 of 14 (permalink) Old 06-30-2015, 12:49 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Thanks for the link.

I have chosen EI low light/weekly but what shout I chose for "Round to digits past the decimal" ?
I'm going to 1000ml solution.
Can I use mineral water instead of distilled water ?
Most important which chemical are most essential for my low tech tank ?
There are lots of option at that page to chose like KNO3,EDTA Fe 13%,KCl etc.
iAquarist is offline  
post #10 of 14 (permalink) Old 06-30-2015, 12:34 PM
Planted Tank Guru
 
PTrader: (3/100%)
Join Date: Aug 2014
Location: Maryland, USA
Posts: 2,339
Rexolin CXK

The "core" fertilizers are kno3, kh2po4, k2so4, and micros (csm+b typically although some use microplex)

K2so4 and a micro mix are important for pretty much all planted tanks. Depending on you plant/fish ratio you may or may not need kno3 and kh2po4. Fish waste provides nitrate and phosphate, so the more fish you have, and the fewer plants you have, the less you'll need. High tech tanks always need these two, but some low tech tanks with heavy fish stock can do without. If you need lots of these two, then k2so4 becomes less important, and some high tech tanks use enough kno4 that they don't need k2so4.

Beyond these, some tanks need a gh booster to provide calcium/magnesium, but this is more for folks with very soft water or using rodi.

A few folks find they need a separate iron fertilizer. Csm+b has edta iron in it, which works well in most water, but high carbonate water will tend to precipitate it. Thus some hardwater folks add dpta fe, which is harder for plants to absorb, but more stable in hard, alkaline water.

New to planted tanks, avid gardener/tinkerer.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Fluval C4 + Quietflow 30, Finnex Planted+ with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, low-tech.
10 gallon secondary tank with Finnex stingray with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, AC20, low tech
mattinmd is offline  
post #11 of 14 (permalink) Old 07-01-2015, 01:43 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Thanks for ur reply!

I guess I more fish but more plants too.
Water is hard and water left a stains on glass.
So I guess I don't need to worry about calcium/magnesium.

So,far my dosing calcukation as follows for 60lit/15gal low tech tank.

1.K2SO4 250gm + 1000ml water
2.KNO3 200gm + 1000ml water
3.KH2Po4 50gm + 1000ml water

I will dose each of 5ml of mixture once in a week.
But,problem is csm+b is not available here so I have find alternative for that.

Bump: One more thing.
Sorry may be off-topic question.
I read that for low tech tank changing water may cause algae due to change of CO2 level.
But,if I don't change water then there will be too much of ammonia due to to excess bio-load or fishes.
So,is there any way(plant) which can help to reduce ammonia from aquarium water ?
Then I don't have to change water weekly.
iAquarist is offline  
post #12 of 14 (permalink) Old 07-01-2015, 01:48 AM
Planted Tank Guru
 
PTrader: (3/100%)
Join Date: Aug 2014
Location: Maryland, USA
Posts: 2,339
Check for milllers microplex. It may be available where csm is not, since it is a product of the UK instead of the US.

New to planted tanks, avid gardener/tinkerer.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Fluval C4 + Quietflow 30, Finnex Planted+ with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, low-tech.
10 gallon secondary tank with Finnex stingray with
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
, AC20, low tech
mattinmd is offline  
post #13 of 14 (permalink) Old 07-01-2015, 02:11 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Thanks but I'm from India so milllers microplex may not be available here too.



Sorry for low quality image.
Got no cam except my mobile.


Pic is a months old.
My fish list:
2x Angels(will shift to my brother new tank soon)
11x Shrpae Tetras
3x Bronze Cory
1x Red Fin Tetra
3x Zebra Danios
3x Black Moly
1x Red Sword-tail Moly

Plant list:
Pigmy Chain
Rotala Rotandafolia(not growing well)
Bacopa(almost dead)
Ludwigia Beprives(not sure)
Ludwigia Broadleaf(added recently but no going well)
Screw Val(almost dead)
iAquarist is offline  
post #14 of 14 (permalink) Old 07-06-2015, 02:36 AM Thread Starter
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2015
Location: CA
Posts: 23
Facing Brown Dust(diatoms) algae problem my old tank.
Water become cloudy.
Tried to black out but did not work.
WC many times but did not work.
Feeding fish very less amount but not working either.
The Brown dust covers all the plants including substrate all over the tank.
Its also looks like mud in water.
But,how can much/soil come up all of a sudden from below.
My Hard Water may be cause of this but I got no option to use other water.



Keeping the following Trumpet Snails can be useful in this case ?

Last edited by iAquarist; 07-06-2015 at 02:52 AM. Reason: New Addition
iAquarist is offline  
Reply

Tags
None

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome