What has gone wrong with your automated water changing systems?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY

Thread Tools Display Modes
Old 11-23-2009, 02:39 PM   #1
original kuhli
Planted Tank Enthusiast
original kuhli's Avatar
PTrader: (0/0%)
Join Date: Nov 2006
Location: Calgary, Canada
Posts: 741

What has gone wrong with your automated water changing systems?

I'm sure we've all had a few 'gulp' moments messing with automated water change systems and I thought it would be useful to share the problems we've had. My hope is that we can all improve our designs and minimize any trouble these systems can cause - because the know the benefits are fantastic!

1. I used these float switches from autotopoff.com, after a year and a half one finally gummed up and stuck. All that happens with my system when that occurs is that the tank will refuse to fill. I covered my sensors with loose tea filters that look something like this:http://baldmountaincoffee.com/Mercha...L/00002131.jpg. I'm not 100% certain whether its a good idea or not.

2. I used a diaphram style drain solenoid like this: http://www.madhocontrols.com/solenoid_valve_lar.jpg. The problem I had with it was under unusual circumstances but basically I was messing around backflushing my filter and a tiny piece of carbon stopped the diaphram from sealing completely.

The result was the tank kept draining, thus it kept filling. At that point I didn't have a thermostatic valve in place and the inlet water was cold (small volumes didn't matter). Consequentially some fish got very cold, some didn't make it. Two design changes were required. First a thermostatic valve, the best I could find was like you found, limited to 90 deg F or so. A bit warm and still an issue if the tank were unattended for long periods but better than freezing the fish out! And the second I did not implement: limiting the length of a fill cycle with a timer program. I really think this is an important one to avoid lots of potential damage.
original kuhli is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 11-23-2009, 03:04 PM   #2
Are these real?
Wasserpest's Avatar
PTrader: (182/100%)
Join Date: Jun 2003
Location: Monterey, CA
Posts: 15,320

Initially I used a cheap, simple float valve to turn off the house water supply on the fill side of the tank. They are not made for that. It just kept dripping.

Using a float switch controlling a irrigation valve resolved the issue.

Really haven't had any issues with the original automated water changer, although if the irrigation valve or float switch had failed, it would have been bad.

My latest setup is a bit different, almost idiot proof, with a passive overflow. So far so good... but it has only been a few weeks.
Wasserpest is offline   Reply With Quote Quick reply to this message

Quick Reply

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Your Location. As precise as you feel comfortable with.
Security Question
While balancing on a piece of wood, two inches by four inches known as a 2x4, John and his friend Sally both spotted a dalmatian inside of a truck with sirens. The animal with John and Sally is a _ _ _?
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT. The time now is 01:34 AM.

Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012