Where to by flourescent lights?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Lighting

Thread Tools Display Modes
Old 05-25-2004, 12:07 AM   #1
Algae Grower
PTrader: (0/0%)
Join Date: Apr 2004
Posts: 13

Where to by flourescent lights?

I need lights that are about 6 inches long and only 1.5 inches in diameter. I went to home depot and they didn't have any that thin. Anybody have any place online I could buy from?

They are normal screw in size.
twostep is offline   Reply With Quote
Sponsored Links
Old 05-25-2004, 01:33 AM   #2
Wannabe Guru
PTrader: (7/100%)
Join Date: Dec 2003
Location: Twin Cities, Minnesota
Posts: 1,717

I don't know of any screw-in (supposedly compact fluorescents?) are that thin. They don't come in one tube styles, by rather as double tube, quad tube, or helix (most common). Usually the 6 inch, 1.5 inch diameter ones are incandescent.
Rolo is offline   Reply With Quote
Old 05-25-2004, 02:44 AM   #3
Algae Grower
PTrader: (0/0%)
Join Date: Jan 2004
Location: Vancouver, Canada
Posts: 83
Send a message via ICQ to Rikko Send a message via AIM to Rikko

I've never seen any with that thin a profile either. Are you just trying to screw them into a standard incandescent aquarium fixture? The type where the two sockets are in the middle? If so, there are bulbs you can fit in there. The ones in our store are from Envirolite and will fit those fixtures. I believe the 7W, 11W, and 14W bulbs will fit it - any larger and they are too fat to sit in the fixtures.
You could try phoning pet stores and hydroponics shops and seeing if they carry Envirolite compact fluorescents. Barring that, a larger aquarium specialty store will probably carry a similar line.
And barring THAT, try a hardware store and the lighting section - I've seen a few conpact fluoros that would fit as well, but the light output was a rather ugly yellow.
77 gal fresh: South Americans + plants w/ 4xT5 NO
65 gal reef: Nothin' w/ 4xT5 NO
33 gal brackish: Gobies w/ 1xT12 NO
Rikko is offline   Reply With Quote
Old 05-25-2004, 03:03 AM   #4
Planted Tank Guru
PTrader: (9/100%)
Join Date: Mar 2004
Location: Fremont, CA
Posts: 2,605

Are you trying to retrofit a fixture or are you actually looking for replacement bulbs? Like Rolo said, all the screw-in CF bulbs have a pretty wide base (>2").

AH Supply has a 13W CF retrofit kit. The bulb should be close to meeting your size requirements, but the reflector is 8" x 3" x 1.5". You should give them a call and see if they can recommend anything. I know there are 13W CF bulbs (4 tube PLC type) that are only 4.5" long and 1.375" wide.
bharada is offline   Reply With Quote
Old 05-25-2004, 02:14 PM   #5
Algae Grower
PTrader: (0/0%)
Join Date: Apr 2004
Posts: 13

I Bought an aquarium kit and it came with a hood. The hood has two incandescent lights in the middle, pointing opposite directions. They are 6 inches long and about 1.5 wide. There isn't much clearance for a bulb much bigger than that. All the screw-in flourescent lights I saw where about 3 incehs wide which is a tad too big. I'll take a picture tonight and post it...maybe that will help
twostep is offline   Reply With Quote
Old 05-25-2004, 03:17 PM   #6
Are these real?
Wasserpest's Avatar
PTrader: (175/100%)
Join Date: Jun 2003
Location: Monterey, CA
Posts: 15,099

Walmart (some? all?) sells very slim 10 Watt lights in their pet section. 6500K, U-shaped bulbs rather than spiral shaped. I use two of them for my 10 gal, works great with good reflectors.
Wasserpest is offline   Reply With Quote
Old 05-25-2004, 08:48 PM   #7
Planted Tank Guru
Georgiadawgger's Avatar
PTrader: (14/100%)
Join Date: Apr 2004
Location: Arlington, VA (Near the Pentagon)
Posts: 2,416

Wasserpest is right. I just got back from Walmart with one of those little fluorescent bulbs. They're about $4.50. I'm taking my GF's empty 2.5 g betta tank and using it as a plant prop tank with clippings.
40g AGA Breeder: Pimp# 44: Eheim 2026; Anti- Filstar; CLTT UV; 3 wpg PC, pressurized CO2. GATA! FTD!!!
Georgiadawgger is offline   Reply With Quote
Old 05-25-2004, 08:59 PM   #8
Planted Tank VIP
GDominy's Avatar
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363

Here is a link to a previous post I made about hte Panasonic screw in Bulbs... the smallers ones (14 watt) can easily fit into really tight canopies without modification or ventilation (they are designed to work in moist air and high heat)

GDominy is offline   Reply With Quote
Old 05-25-2004, 10:12 PM   #9
Wannabe Guru
jart's Avatar
PTrader: (0/0%)
Join Date: Jan 2003
Location: NS Canada
Posts: 1,369

yeah i know what you're talking about twostep. in the past i have gutted such a store-bought hood, then remounted the fixture with a spacer so the fluorsecent screw in bulbs would fit. this was a major pita, and the whole assembly turned out kind of awkward looking. hopefully wasser's idea will help you. i guess that's how he got to be moderator!

(while i am typing i see gareth has chimed in too!)
jart is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Buying a new light fixture and lights. What should I get? overhaul Lighting 1 09-22-2004 01:49 PM
The doctors lights traded for AHsupply lights! pufferfreak Lighting 4 08-08-2004 06:52 PM
Just wired my lights sailblue5 Lighting 4 07-12-2004 03:14 PM
wiring strip lights sailblue5 Lighting 2 06-05-2004 12:47 AM
Red Lights..... Flgatorguy General Planted Tank Discussion 8 11-30-2002 05:29 PM

All times are GMT. The time now is 11:31 PM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012