The right kind of needle valve?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 05-18-2004, 02:39 AM   #1
Rolo
Wannabe Guru
 
PTrader: (7/100%)
Join Date: Dec 2003
Location: Twin Cities, Minnesota
Posts: 1,717
Default

I'm looking into getting a pressurized system and did a seach on no ebay links allowed Came across this needle valve Question: Is this what I'm looking for? Along with the results I got alot of automotive needle valves, so I don't know if this one is for CO2 tanks and can be hooked up to regulators.

If not, can someone give me a picture of the proper type of needle valve?
Rolo is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-18-2004, 03:01 AM   #2
wellbiz
Wannabe Guru
 
wellbiz's Avatar
 
PTrader: (0/0%)
Join Date: Aug 2003
Location: Michigan
Posts: 1,270
Default

Quote:
Originally Posted by Rolo
I'm looking into getting a pressurized system and did a seach on no ebay links allowed Came across this needle valve Question: Is this what I'm looking for? Along with the results I got alot of automotive needle valves, so I don't know if this one is for CO2 tanks and can be hooked up to regulators.

If not, can someone give me a picture of the proper type of needle valve?
Rolo,

Check this out http://www.thekrib.com/Plants/CO2/solenoid.html which should prove useful.....

jason
__________________
120g, Flourite & Sand. DIY Stand and Canopy. CF lighting 3wpg, Pressurized C02, DIY reactor. 2-XP3's, 500watt heater.
Heavily planted
wellbiz is offline   Reply With Quote Quick reply to this message
Old 05-18-2004, 04:22 AM   #3
bobalston
Algae Grower
 
PTrader: (0/0%)
Join Date: Nov 2003
Location: Dallas, TX USA
Posts: 98
Default

Take a look at my web site. I have a summary of various needle & metering valves from Excellent ones to servicable ones such as the Clippard MNV-4k2 which I and many others use.
Parker makes some very high quality valves - as per the info in my web site; but they also make ones not useful for us.

http://members.cox.net/tulsaalstons/...Pressure%20CO2

Bob
bobalston is offline   Reply With Quote Quick reply to this message
Old 05-18-2004, 05:37 AM   #4
FobbyBobby
Planted Member
 
PTrader: (20/100%)
Join Date: Mar 2004
Location: Irvine, CA
Posts: 197
Default

does the clippard needlevalve have to be modified to work or anything???
FobbyBobby is offline   Reply With Quote Quick reply to this message
Old 05-18-2004, 11:46 AM   #5
Rolo
Wannabe Guru
 
PTrader: (7/100%)
Join Date: Dec 2003
Location: Twin Cities, Minnesota
Posts: 1,717
Default

Thanks for the link Bob! Helps alot!
__________________
Rolo is offline   Reply With Quote Quick reply to this message
Old 05-18-2004, 01:11 PM   #6
SCMurphy
PT Biologist
 
SCMurphy's Avatar
 
PTrader: (4/100%)
Join Date: Oct 2003
Location: Maryland USA
Posts: 3,215
Default

I use a swaglok valve (the BSS-4 with the best seals special ordered $58.00, with a fancy vernier handle + $14.00), but it is expensive. The clippards look like a good value, I'm going to investigate them next.
__________________
Sean

Aquascape? I'm a crypt farmer.

It's a fine line between fishing and standing on the shore looking like an idiot.

That IS an aquascape, it's titled "The Vacant Lot".
SCMurphy is offline   Reply With Quote Quick reply to this message
Old 05-19-2004, 01:04 AM   #7
jart
Wannabe Guru
 
jart's Avatar
 
PTrader: (0/0%)
Join Date: Jan 2003
Location: NS Canada
Posts: 1,372
Default

Quote:
Originally Posted by FobbyBobby
does the clippard needlevalve have to be modified to work or anything???
i bought my clippard from robert at aquabotanic. it came complete with an 10-32 adaptor fitting. i've read that these fittings are nearly impossible to come by unless you order from robert or from clippard directly.

to simplify things i took the needle valve and the fitting into a home brew store and said: I'll buy one of your co2 tanks and a regulator if you can fit this needle valve onto it.

of course you might save yourself some hassle if you just went right to marc's website (aquatic-store.com) and order a package deal. i'm sorry i didn't.
jart is offline   Reply With Quote Quick reply to this message
Old 05-19-2004, 04:14 AM   #8
bobalston
Algae Grower
 
PTrader: (0/0%)
Join Date: Nov 2003
Location: Dallas, TX USA
Posts: 98
Default

Yes the Clippard MNV-4kw needs some adapters to connect directly to a regulator. Some people, like apparently Robert and others, sell the Clippard with one of the adapters, a 10/32 to 1/8 NPT. That is what I got when I bought mine. You then need a 1/8 to 1/4 NPT adapter. This info is found in my web site.

The swagelok B-SS4 is a great valve. Expensive relative to the Clippard but gives much finer/easier adjustment. However, once the clippard is set, you can forget it. I have only changed mine once since setting it. I don't even have to deal with it when I refill the tank.

Bob
bobalston is offline   Reply With Quote Quick reply to this message
Old 05-19-2004, 12:44 PM   #9
SCMurphy
PT Biologist
 
SCMurphy's Avatar
 
PTrader: (4/100%)
Join Date: Oct 2003
Location: Maryland USA
Posts: 3,215
Default

Quote:
Originally Posted by bobalston
Yes the Clippard MNV-4kw needs some adapters to connect directly to a regulator. Some people, like apparently Robert and others, sell the Clippard with one of the adapters, a 10/32 to 1/8 NPT. That is what I got when I bought mine. You then need a 1/8 to 1/4 NPT adapter. This info is found in my web site.

The swagelok B-SS4 is a great valve. Expensive relative to the Clippard but gives much finer/easier adjustment. However, once the clippard is set, you can forget it. I have only changed mine once since setting it. I don't even have to deal with it when I refill the tank.

Bob
I never have to touch my swagelok valves unless I want to change a bubble rate. They hold their setting through a canister change (which isn't very often since I have two 20#'ers) but I do agree, and stated before, they are expensive. But since my substrate only costs me $10 a tank, I get to buy nice needlevalves.

I might have to check out the hex manifold someone is selling too.
__________________
Sean

Aquascape? I'm a crypt farmer.

It's a fine line between fishing and standing on the shore looking like an idiot.

That IS an aquascape, it's titled "The Vacant Lot".
SCMurphy is offline   Reply With Quote Quick reply to this message
Old 05-19-2004, 03:57 PM   #10
Derek
Algae Grower
 
PTrader: (0/0%)
Join Date: Jan 2004
Location: Edmonton, Canada
Posts: 45
Default

Rolo, that valve pictured on eBay is great except that it is a SOCKET WELD valve meaning that it has little counterbores at inlet and outlet designed for slip-fit insertion of stainless steel tubing and back-welding to effect a seal. NOT a good choice unless you are adept at TIG welding. It's also " tube size when " is what is (likley) needed.

Derek
__________________
10 gallon, AHS 36w, DIY CO2, Aquaball(!), plants, fish, more enjoyable to watch than the TV
5 gallon desk-top, AHS 13w, Flourish Excel, AC Mini, plants, fish, nicer to look at than the CRT
Derek is offline   Reply With Quote Quick reply to this message
Old 08-31-2004, 02:09 PM   #11
Rolo
Wannabe Guru
 
PTrader: (7/100%)
Join Date: Dec 2003
Location: Twin Cities, Minnesota
Posts: 1,717
Default

This post is going in and new direction, forget about what I was saying about the other parker needle valve.

I found a local distributer who can order the MNV-4K2 clippard valve. I guess a special adapter is needed and asked him if it comes with one...he said no. So what adapter do I need, where can I find it, and about how much? I'm not going to order until I know I can use it.

Someone was talking about a 10/32 to 1/8 NPT. Then I have to get a second adapter, the 1/8 to 1/4 NPT. Could anyone explain these?

BTW I must order at least 2 valves. Keep your eyes peeled cause 1 might be for sale.
__________________
Rolo is offline   Reply With Quote Quick reply to this message
Old 09-01-2004, 01:27 AM   #12
Rex Grigg
Planted Tank Guru
 
Rex Grigg's Avatar
 
PTrader: (65/100%)
Join Date: Dec 2002
Location: Portland Orygun
Posts: 9,600
Send a message via ICQ to Rex Grigg Send a message via AIM to Rex Grigg
Default

The Clippard needle valve has 10-32 threads. Most regulators either have 1/8" or 1/4" NPT sized holes where you want to mount the needle valve. Order the 10-32 to 1/8" needle valve from the same place you order the needle valve. Then if you need the 1/8" to 1/4" adapter you can get it at most any Home Depot or Lowe's.

Or you could save yourself a ton of trouble and just order the needle valve with adapter from Aquabotanic.com or any of several other outlets.
Rex Grigg is offline   Reply With Quote Quick reply to this message
Old 09-01-2004, 03:20 AM   #13
Rolo
Wannabe Guru
 
PTrader: (7/100%)
Join Date: Dec 2003
Location: Twin Cities, Minnesota
Posts: 1,717
Default

Thanks Rex, that all makes sense now.

Just another quick question. Where on the needle valve does the hose attach to? In the picture there is no threaded nipple.
__________________
Rolo is offline   Reply With Quote Quick reply to this message
Old 09-01-2004, 01:34 PM   #14
Rex Grigg
Planted Tank Guru
 
Rex Grigg's Avatar
 
PTrader: (65/100%)
Join Date: Dec 2002
Location: Portland Orygun
Posts: 9,600
Send a message via ICQ to Rex Grigg Send a message via AIM to Rex Grigg
Default

You also need to buy the nipple. I forget about that as my local distributor carries them in stock with the nipple attached.
Rex Grigg is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressurized CO2: regulator, needle valve Inzeos General Planted Tank Discussion 19 09-25-2004 07:47 AM
marine monsters needle valve Cody Equipment 1 07-09-2004 02:16 AM
CO2 Needle Valve TeeItUp Equipment 2 03-20-2004 04:16 AM
clippard needle valve lbsfarms Equipment 4 01-05-2004 04:02 PM
Help finding needle valve.... Pancake Equipment 4 02-28-2003 07:52 PM


All times are GMT. The time now is 02:11 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012