Okay, let's go semi-DIY
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 06-22-2014, 06:09 PM   #1
MABJ
Invert Warrior
 
MABJ's Avatar
 
PTrader: (13/100%)
Join Date: Mar 2012
Location: NY
Posts: 3,863
Default

So I've got a new rack that's rated for 350+ Lbs per shelf. I don't ever plan on putting more than 150 lbs per shelf, so I'm good there.

My question is basically: will these wired shelves be OK to directly place a rimless/frameless tank on plus the garden mat?

Should I put something else on it to avoid damaging my aquariums?

Thanks for the advice in advance. I'll attach a picture in a minute.

I'll have another question about DIY LEDs when we figure the first thing out.

Whitmor 6060-322 Supreme 4-Tier Shelving Unit, Chrome:Amazon:Home & Kitchen

This is the stand.
__________________
|Mossy Bonsai|Almost ADA|DBP Loonnng|CRS Spec|
|My Tanks ʌ | Shrimp advice v|
|Essential tools|List of inverts|Sage advice|Truth About Snails|
Mark A Belcher Junior, founder -- DBP Club.

Last edited by Darkblade48; 06-25-2014 at 02:24 PM.. Reason: Please use the edit function for back to back posts to keep threads cleaner
MABJ is online now   Reply With Quote
Sponsored Links
Advertisement
 
Old 06-22-2014, 06:34 PM   #2
gus6464
Wannabe Guru
 
PTrader: (6/100%)
Join Date: Dec 2011
Location: San Diego, CA
Posts: 1,155
Default

The link doesnt work. Also as long as the mat is thick enough it will be fine. You just don't want the wire cutting into the mat with the weight as that could scratch the tanks.

Another thing you could do if you are worried is to cut a piece of plywood that is same size as tank then put that on the shelf, then garden mat, then tank to keep it looking clean. 1/4" thick plywood is more than enough and you can get a 4x8ft sheet at HD for $20 which would be enough for a ton of tanks.
gus6464 is online now   Reply With Quote
Old 06-22-2014, 06:57 PM   #3
MABJ
Invert Warrior
 
MABJ's Avatar
 
PTrader: (13/100%)
Join Date: Mar 2012
Location: NY
Posts: 3,863
Default

Odd the link works for me fine on two devices.

But thank you. I'll look for some plywood. I'll sand and paint it to make it nicer looking.
__________________
|Mossy Bonsai|Almost ADA|DBP Loonnng|CRS Spec|
|My Tanks ʌ | Shrimp advice v|
|Essential tools|List of inverts|Sage advice|Truth About Snails|
Mark A Belcher Junior, founder -- DBP Club.
MABJ is online now   Reply With Quote
Old 06-23-2014, 12:51 AM   #4
jeffkrol
Wannabe Guru
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: WI
Posts: 1,684
Default

Quote:
Originally Posted by MABJ View Post
Odd the link works for me fine on two devices.

But thank you. I'll look for some plywood. I'll sand and paint it to make it nicer looking.
Link didn't work for me either..
Trying this one:
Amazon.com - Whitmor 6060-322 Supreme 4-Tier Shelving Unit, Chrome - Standing Shelf Units Amazon.com - Whitmor 6060-322 Supreme 4-Tier Shelving Unit, Chrome - Standing Shelf Units
jeffkrol is online now   Reply With Quote
Old 06-23-2014, 01:54 AM   #5
MABJ
Invert Warrior
 
MABJ's Avatar
 
PTrader: (13/100%)
Join Date: Mar 2012
Location: NY
Posts: 3,863
Default

Yeah that link works fine for me too.

I've got the solution . I had some left over 1/8 inch tile that I'm going to lay down. It fits pretty snugly in there so I'm happy with it.

Made some progress today. I laid the groundwork for my first suspended light tank.

One of the other questions I had for you mister fix its was if I wanted to lay three strips of LEDs, one under each shelf (34 inch long shelves) how should I go about it? Is there a cheap option?

I just wanted it so I could do regular maintenance outside of my photoperiod.
__________________
|Mossy Bonsai|Almost ADA|DBP Loonnng|CRS Spec|
|My Tanks ʌ | Shrimp advice v|
|Essential tools|List of inverts|Sage advice|Truth About Snails|
Mark A Belcher Junior, founder -- DBP Club.
MABJ is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:11 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012