BiscuitSlayer's 29 - Updated 4.1.08 -Welcome to the Jungle - (56K Unfriendly)
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 12-17-2007, 10:53 PM   #1
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

BiscuitSlayer's 29 - Updated 4.1.08 -Welcome to the Jungle - (56K Unfriendly)


This is my first Journal. The tank is a 29 gallon with pressurized CO2 and a freshwater Coralife fixture at 130W. I am using a Filstar XP2 for filtration. Sorry about the crappy photos. I am using an old Sony Cybershot that doesn't do that well with macro photos. I am going to see if I can get my buddy to take some pics with his good camera or let me borrow it. This tank has been up and running for about 5 years now, but it is really starting to take off with the addition of pressurized CO2. The pictures don't do the tank justice. Seeing it up and personal is much better.

You will probably notice some GSA in the photos on some leaves, etc. It is actually receding at a good rate now that I have boosted the phosphates.

Full Tank Shot


Left Tank Shot


Otto Closeup


Female Rasbora getting frisky with a leaf...


Another Frisky shot


Anubias action


Glosso starting to fill in


Center of tank



If the pictures are too big or anything let me know. I'll resize them. Any pointers on photos with an old cybershot would be appreciated as well.

Last edited by BiscuitSlayer; 12-14-2008 at 11:39 AM..
BiscuitSlayer is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 12-17-2007, 11:57 PM   #2
khoile
Planted Tank Enthusiast
 
PTrader: (1/100%)
Join Date: Jan 2005
Location: OC, CA, US
Posts: 619
Default

Nice tank... why are there so many tiny bubbles?
khoile is offline   Reply With Quote
Old 12-18-2007, 03:16 AM   #3
evercl92
Planted Tank Enthusiast
 
evercl92's Avatar
 
PTrader: (14/100%)
Join Date: Aug 2006
Location: Columbus, OH
Posts: 512
Default

Nice tank. Photos are a little over-exposed, but could look great.

Turn down your (I believe it's called) aperture. The option that, typically, goes from -2 to +2. I set mine to around -1.
__________________
evercl92 is offline   Reply With Quote
Old 12-18-2007, 04:36 AM   #4
jinx©
Wannabe Guru
 
jinx©'s Avatar
 
PTrader: (6/100%)
Join Date: Oct 2007
Location: Sacramento, CA
Posts: 1,545
Default

Looks good bsmith, even with that camera.
Its actually refreshing to see some algae for change...lol
__________________
jinx© is offline   Reply With Quote
Old 12-18-2007, 09:51 AM   #5
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

Thanks guys. The bubbles came from feeding the CO2 into a limewood airstone and feeding that into a powerhead. The bubbles were misted all over the tank. I recently added an inline CO2 reactor and now there aren't any more bubles.

Evercl92 - Thanks for the tip. I know what you are talking about and I'll give that I try. The other thing I was thinking is to turn off one of the PC lights. That would probably help too. I'm also going to take some pics when the room is dark.

Jinx - There is algae in there but it is coming under control. All of the reading is finally starting to pay off.
BiscuitSlayer is offline   Reply With Quote
Old 12-18-2007, 09:49 PM   #6
TheOtherGeoff
Wannabe Guru
 
PTrader: (4/100%)
Join Date: Feb 2003
Location: St. Louis, MO
Posts: 1,392
Send a message via AIM to TheOtherGeoff Send a message via MSN to TheOtherGeoff
Default

Quote:
Originally Posted by evercl92 View Post
Nice tank. Photos are a little over-exposed, but could look great.

Turn down your (I believe it's called) aperture. The option that, typically, goes from -2 to +2. I set mine to around -1.
no thats exposure compentsation. aperture is you f stop number ( f2.5, f4.5 etc etc ) its kinda like your pupil
__________________
The Fish Tank, Tranquility in Motion
20 Long all gone now

75 Gallon Planted discus has come to an end.......but only for The Trout Tank
TheOtherGeoff is offline   Reply With Quote
Old 12-19-2007, 12:09 AM   #7
evercl92
Planted Tank Enthusiast
 
evercl92's Avatar
 
PTrader: (14/100%)
Join Date: Aug 2006
Location: Columbus, OH
Posts: 512
Default

Quote:
Originally Posted by TheOtherGeoff View Post
no thats exposure compentsation. aperture is you f stop number ( f2.5, f4.5 etc etc ) its kinda like your pupil
gotcha
/\/
__________________
evercl92 is offline   Reply With Quote
Old 12-19-2007, 11:53 AM   #8
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

The picts were actually too big. They are supposed to be 1024 x 768 max with a max size of 250KB. Mine were about 400 to 500 KB in size, so I knocked them down to 800 x 600. I'll probably post some new pics today since there has been fairly considerable growth since these pics were taken last week. I might also get some different plants today.
BiscuitSlayer is offline   Reply With Quote
Old 12-19-2007, 04:41 PM   #9
macclellan
Planted Tank Guru
 
macclellan's Avatar
 
PTrader: (208/100%)
Join Date: Dec 2006
Location: New Orleans
Posts: 5,062
Default

Errrr, pardon my being dense, but what is the 'teetering on disaster' part?
macclellan is offline   Reply With Quote
Old 12-20-2007, 11:55 AM   #10
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

macclellan - My bioload is pretty high. I have a lot of fish in this tank. I am hopefully going to upgrade the tank to a 75 gallon soon and move all of the fish and plants to that. The reason I say its teetering on disaster is because if I have to keep up with the tank or I am going to have some algae problems. As you can see in the pics, there are a few algae problems.

Everything is starting to come under control, but I have to keep up with it. I am running a XP2 on the tank so I am over filtering quite a bit.

I should have explained that when I first started the thread.
BiscuitSlayer is offline   Reply With Quote
Old 12-25-2007, 04:56 AM   #11
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

Since I posted the original pics and description, there have been a few changes. The biggest change was adding a DIY reactor for the CO2 injection.

The DIY reactor:



The reactor is based off of Rex's type of reactor with a few of my own personal mods. I included a cap at the bottom ( you can barely see it ) where it can be opened up and bio balls can be inserted or the reactor can be cleaned out. I chose not to add bioballs based on the information that I have seen Rex post. To be honest with you, at this time I don't really see a need. I am getting some gas build up because I am pumping in about 3 bps into the reactor, but the gurgling sound is only noticeable when you open the cabinet and listen closely. So far, the growth with certain plants have been incredible.

As you will see further down in the tank shots, I have removed the powerhead from the tank. This was my original method of diffusion. I used either a ceramic diffuser or a limewood airstone to produce fine bubbles that I had sitting directly under a powerhead. The result was misting CO2 bubbles everywhere in the tank. I personally didn't like the fact that I had the equipment in the tank for this, nor did I like the microbuble misting effect. I was getting plants to pearl within about 6 hours whereas now I am getting plants to pearl in about 4 hours. I still have not purchased my drop checker for CO2 yet.



Here is a pic of the inside of the cabinet with the XP2 and the 10lb tank and regulator:


I went with an XP2 with the intention of upgrading to a 75 in the near future and just buying another XP2. If I do get a 75, I think I will add on an XP3. For those of you out there thinking about a canister filter for your tank that is in the 30 gallon range, I think the XP2 is the way to go. It is a perfect match. My flow rate is great, but I don't think it is too much. The only time that it appears to be a little too much is when the plants reach the output of the spraybar.


On to the pics:


Here is a full tank shot:


My Purple Cabomba is going absoluely nuts. I actually trimmed this last Thrsday (12/20/07) and it has basically almost doubled in size since then. Here are a couple more shots where I tried to focus the attenion on the Cabomba.

Five days ago, the cabomba on the right was the same height as the Rotala Magenta right next to it.


These were clippings that I replanted from the center of the tank to the darkest corner. When I planted these clippings, they were either less than half or exatly half the size that they are now. One thing that you might notice is the acutal stalk growth. I am not getting many new leaves on these plants, but the stalk growth is about an inch a day (seriously)! I am thinking about planting 1 inch cuttings using the tips only and seeing how quickly they grow over a 1 week period. I have a feeling that they would reach the top of the tank within two weeks or less.




I would actully like to grow this plant thicker rather than taller. If anyone has any suggestions (other than lighting) please let me know. My lighing option that might work based on a thread that I read might be to go from the coralife fixture to an AH Supply fixture. Don't want to spend the money right now.


I moved my sword (which is alive, very green, but not really growing) from the back wall to the middle of the tank. I have a feeling that I might have moved it a bit too much within the last few months and I think I stressed it. The GSA that had a very strong foothold on this plant is starting to disappear to the point that you would never have known that it was there. In the same following shot, you can see a very small wisteria plant in the very front. It must have broken off the main plant and taken root where it is. When the wisteria first started growing where it is, I thought that the glosso either had a problem or it was a mutant strain or something. For a couple of weeks I just called it the mystery plant. It is growing like a weed too. It isn't out of control, but I can see giving it away or selling it soon.





Here is a close up shot of a little Java Fern plant that I attached to a rock. The funny thing is that this is a plant that has been in my aquarium for literally years. At one time, I had a crayfish in the tank and it wound up decimating my plants. It had a real appetite for salad or something. I salvaged this little stub along with 3 others. It has basically grown to about 400 times what it was when I salvaged it.





Last week, I added some Broad Leafed Luigia (sp?) and some Rotalla wallichii that I picked up from a lfs. Both are doing well and I haven't had anything melt. The Wallichii has grown about an inch since last week. While the plant was in the store, almost all of the growth was redish brown in color. The new growth in my tank is pretty green. Anyone have any suggestions as to what to do to keep the red color?




Thanks for the suggestions on the camera guys. I think things have impreved a little. One of the things causing that green glare/overexposre on the bottom right hand shot of the earlier photos was dirt on the lense. I cleaned the lense and it made a real difference. I also cut my lighting in half for the photos (65W instead of 130W using the 10,000K bulb).

Phtography is probably my biggest weakpoint.

Both my wife and I are very satisfied with the way that the tank is looking. I have upped the dosing of phospate and the GSA algae is dissappearing. The high CO2 is driving off the other types of algae present, and my 8 hour photo period appears to be just the right amount of light to keep things in balance. I am dosing nitrates even though my bioload is high and my expensive Sera test kit is telling me that the tank is at 40 to 50 PPM. I am also adding K2SO4 beause I think that the other K sources aren't enough with the amount of light.

The only thing I need now is for my carpet to grow in.

Last edited by BiscuitSlayer; 12-14-2008 at 11:41 AM..
BiscuitSlayer is offline   Reply With Quote
Old 12-25-2007, 05:49 AM   #12
jinx©
Wannabe Guru
 
jinx©'s Avatar
 
PTrader: (6/100%)
Join Date: Oct 2007
Location: Sacramento, CA
Posts: 1,545
Default

Wow...Things have taken off indeed. Looks great.
__________________
jinx© is offline   Reply With Quote
Old 12-26-2007, 12:15 PM   #13
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

Thanks Jinx. The cabomba is seriously going nuts. Actually a little too nuts for my liking. I wish I could slow it down a little and make it grow thicker.
BiscuitSlayer is offline   Reply With Quote
Old 12-27-2007, 06:50 AM   #14
styxx
Wannabe Guru
 
styxx's Avatar
 
PTrader: (13/100%)
Join Date: Jul 2003
Location: Pullman, WA
Posts: 1,304
Send a message via AIM to styxx
Default

Many plants that are usually green will turn red under high intensity light with the right concentration of ferts in the water column. I would suggest however, that possibly increasing your Fe once a week and you may notice an increase in this phenomenon...
styxx is offline   Reply With Quote
Old 12-27-2007, 12:31 PM   #15
BiscuitSlayer
Planted Tank Guru
 
BiscuitSlayer's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2005
Location: Acworth, GA
Posts: 2,365
Default

Styxx,

I have actually just been going with the Flourish micros for Fe. I had a bad experience with FE once that has made me leary of using it.

Do you think it would have any affect on growing the cabomba thicker or is your reccomendaition just for color of the Wallichii?

Last edited by BiscuitSlayer; 12-28-2007 at 05:58 AM..
BiscuitSlayer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:27 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012