DIY Power Reactor Pump Question
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 01-31-2004, 11:52 PM   #1
depthC
Planted Member
 
PTrader: (0/0%)
Join Date: Oct 2003
Location: Wi
Posts: 156
Send a message via AIM to depthC Send a message via MSN to depthC
Default

I plan to make myself a diy power reactor since its a simple and easy concept and provides great carbon dioxide diffusion. My only question is what is a good flow rate for the pump? I plan on starting out using this reactor on my 10g planted and later buying a new pump and using it on a 45g.

So my question is, what is a good pump and good g.p.h. for a 10g tank ?

Also ive looked at the PLANT GRO CO2 SYSTEM BUBBLE COUNTER and was thinking about trying one of these also for comparison in better diffusion. Has anyone had good results with these and could recommend me purchasing one? Thanks in advance.

- depthC
__________________
Whats in your glass box?
depthC is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-17-2004, 04:29 AM   #2
soko
Algae Grower
 
PTrader: (0/0%)
Join Date: Dec 2003
Posts: 45
Default

Yeah, I am wondering the same thing.
__________________
-50 Gallon Acrylic, 36"x18"x17"
-96W CFL, DIY Hood, Aquaclear 500, Ebo-Jager 200W Heater, DIY CO2
-Hygro, Amazon, Melon & Radican Sword, Unknown Val, Java Fern, African Bogwood
-3 Blue Rams (1m/2f), 1 Angelfish, 3 Ottos
soko is offline   Reply With Quote
Old 02-17-2004, 04:47 AM   #3
Wasserpest
Are these real?
 
Wasserpest's Avatar
 
PTrader: (175/100%)
Join Date: Jun 2003
Location: Monterey, CA
Posts: 15,115
Default

It all depends :mrgreen:

In a 10 gal, using a powerhead reactor, due to the good diffusion you can easily overdo it and reach toxic CO2 levels.

For this reason, and for aesthetic reasons, I imagine you would want a rather small reactor tube. So you would look for a small pump, with perhaps around 100 gal/hour rated flow (which translates into less when obstructed by a sponge).

It's hard to say though... this could be something where you just have to try it out, and if it doesn't work out one way or the other, just exchange it at your friendly and understanding LFS.

That bubble counter ladder thing works great in a 10 gal tank! It doesn't look great, but it is kinda fun to watch the bubbles gliding up the ladder (even for your interested fish).
Wasserpest is offline   Reply With Quote
Old 02-17-2004, 01:59 PM   #4
digger
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Feb 2003
Location: Minneapolis, MN
Posts: 519
Send a message via ICQ to digger
Default

I strongly agree with wasser about the ladder. I had a DIY power reactor in a 10 gallon and the thing just took up too much space. The hagen ladder seems to do as good a job and it's almost unnoticeable.
digger is offline   Reply With Quote
Old 02-17-2004, 03:55 PM   #5
anonapersona
Wannabe Guru
 
PTrader: (0/0%)
Join Date: Oct 2002
Location: Houston, TX
Posts: 1,614
Default

I used a Rio 90 on my power rreactor but I think the 50 would ahve been better, to keep from blowing so much CO2 into the scrubbie at the bottom. the Plantguild Reactor has a Rio 50, and it works great.

I also have several ladder diffusers. When I was using a DIY generator placed under the tank with the ladder, I got bubbles that were too large and they ran up the ladder too fast. Mayby the silicone tubing was squeezed too tight going thru the bottle cap and presented an obstruction that the gas had to build up a bit of pressure to overcome, maybe the silicone line was stretchy and it popped out bigger bubbles, I don't know why, but even now, my DIY makes two bubbles sometimes.

So if you have irregular or large bubbles, the power reactor is better. If you have regular bubbles the ladder works fine. I don't know how the Hagen canister makes the bubles so regular, maybe the hard bottle, the short line, the Hagen bottles make regualr smaller bubbles, sized correctly to the length of the ladder run. My bigger bubbles were wasted as some got to the top unabsorbed.
anonapersona is offline   Reply With Quote
Old 02-28-2004, 02:14 PM   #6
ninoboy
Wannabe Guru
 
ninoboy's Avatar
 
PTrader: (0/0%)
Join Date: Jan 2004
Location: Las Vegas , Nevada
Posts: 1,261
Default

Anonapersona,
I had the same problem before with my DIY CO2. Sometimes blowing a few bubble straight then slow down. At the end, I found out what the problem was. It was the check valve. Before, I didn't use the gas seperator, so when the bottle was shaken, some of the mixture went in to the line and kept going until it reached the check valve (stop right there and went in to the check valve compartment). The problem is when the solution in the check valve dried of, it becomes sticky (sugar). The rubber opening in the valve becomes sticky also. It needs more pressure from the CO2 bottle to pass thru the valve. When there is enough pressure, it will blow a few bubble continously (even bigger ones). After that, it'll wait until the next high pressure and so on. I get a very constant flow after I replace the sticky check valve. And I also added a gas seperator to prolong the valve life.
ninoboy is offline   Reply With Quote
Old 02-28-2004, 05:54 PM   #7
malkore
Planted Tank Guru
 
malkore's Avatar
 
PTrader: (0/0%)
Join Date: Nov 2003
Location: Lincoln, NE
Posts: 2,165
Default

I can vouch for the hagen co2 ladder. I hooked it up to pressurized CO2 and kept a 75 gallon tank at optimal levels for a week (until my powerhead reactor was shipped).

It's actually over 90% effective at dissolving CO2. if you have decent water circulation, CO2 will reach the entire tank. It would be more than adequate for a 10gallon tank, and 75% less space taken up, one less cord to plug-in, and less of an eye sore.
__________________
Malkore
Filstar XP2 PIMP #3
Visit my aquarium pages - see specs on my tanks, and photos of how they've evolved
malkore is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about workhorse ballast Rin Lighting 2 09-30-2004 06:51 AM
Plant guild Power Reactor lokobreed Equipment 1 05-28-2004 09:57 PM
Planted Tank Light Temp K Question nexstar Lighting 10 05-27-2004 08:29 PM
Ballast question Ptahkeem Lighting 4 02-18-2004 10:20 PM
Question about 2 x 55watt power compact ballast Ptahkeem Lighting 1 02-06-2004 12:33 PM


All times are GMT. The time now is 04:20 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012