My DIY Double Tank Stand
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 10-12-2013, 10:44 PM   #1
jsanz11
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2013
Location: Laredo, Tx
Posts: 5
Default

My DIY Double Tank Stand


I have 2 40 Gallon tanks. They have the same footprint length wise but not width depth wise. The bottom tank is wider and shorter than the top tank. I welded this together over the weekend last week..painted it, added some panel side that look like brick and also come off which hide the storage area down below for the filters, food and other stuff.
As of right now I only have one tank up and running but it has fake plants...i plan to start the bottom tank with live plants and eventually move the fish down to the bottom tank before I convert the upper tank to a live planted aquarium as well. It will take time, money, and the effort to learn but i'm glad i found this forum as there is lots of useful information. Enough blabbering here are some photos. Thanks!







jsanz11 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-13-2013, 06:51 AM   #2
Legot
Planted Member
 
Legot's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Gilbert, Arizona
Posts: 251
Default

Looks good! What is that veneer you're using?

What are you planning to do with the lower tank?
__________________
People are too often merely stating an assumed truth from flawed observation.
Legot is offline   Reply With Quote Quick reply to this message
Old 10-14-2013, 09:50 PM   #3
jsanz11
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2013
Location: Laredo, Tx
Posts: 5
Default

Thanks! Veneer? Do you mean the type of material the brick is?
The entire frame is 14guage square tubing metal welded together. The brick material is some sort of very tough and thick cardboard I found at lowes. The black trim is just basic crown molding...
As for plants I wanted to make the bottom tank a plantet aquarium and transfer down the fish from above...and with the above tank i'm still not sure..but i'd like for both to be with live plants as right now it's just plastic decor...Maybe a cichlid? not sure yet but i'm open to suggestions!
Thanks!
jsanz11 is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 05:45 AM   #4
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (75/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,975
Default

Do you ever get earthquakes? If so, you may have a problem due to racking loads and the cantilevered upper tank shelf, with the heavy bending load on the rear vertical supports, especially where the diagonal braces are welded to the vertical supports. Steel is very strong, but it does have stress limits too.
__________________
Hoppy
Hoppy is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 03:01 PM   #5
jsanz11
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2013
Location: Laredo, Tx
Posts: 5
Default

No earthquakes here...i added a 3rd beam down the middle backside of it...i also stood up on top of it with a buddy of mine at the same time..we're bot 6 feet over 200 lbs each and there was no bend whatsoever...the level did not move a mm from when we put the tank up there empty to full of water...it feels a bit scary but should be safe...if it comes crashing down i'll be sure to post it here haha
-joey
jsanz11 is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 03:03 PM   #6
acitydweller
ओं मणिपद्मे हूं
 
acitydweller's Avatar
 
PTrader: (177/100%)
Join Date: Dec 2011
Location: New York
Posts: 7,695
Default

if it were me, i would still add a vertical bar on either side of the upper tank down as the center of gravity appears to be very high.
__________________
"I am Groot", the faithful protector
acitydweller is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 04:16 PM   #7
xmas_one
Planted Tank Guru
 
xmas_one's Avatar
 
PTrader: (17/100%)
Join Date: Feb 2010
Location: Long Beach, CA
Posts: 3,256
Default

Where do I place my order?
xmas_one is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 04:49 PM   #8
jsanz11
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2013
Location: Laredo, Tx
Posts: 5
Default

even though it's very hard to flip i also welded to plates on the back which i can screw into my base board but don't feel like i need too...since the upper tank is thinner than the bottome tank...the weight is more towards the back...the uppe tank is about 12 inche deep from front to back...bottom one is about 20 inches...

haha u really want one xmas? took me a whole weekend to built non stop...
jsanz11 is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 08:27 PM   #9
Legot
Planted Member
 
Legot's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Gilbert, Arizona
Posts: 251
Default

Hmm, is that the same fake brick used for mildly tacky walls? :lol:
I like it!
__________________
People are too often merely stating an assumed truth from flawed observation.
Legot is offline   Reply With Quote Quick reply to this message
Old 10-15-2013, 09:51 PM   #10
xmas_one
Planted Tank Guru
 
xmas_one's Avatar
 
PTrader: (17/100%)
Join Date: Feb 2010
Location: Long Beach, CA
Posts: 3,256
Default

Quote:
Originally Posted by jsanz11 View Post
even though it's very hard to flip i also welded to plates on the back which i can screw into my base board but don't feel like i need too...since the upper tank is thinner than the bottome tank...the weight is more towards the back...the uppe tank is about 12 inche deep from front to back...bottom one is about 20 inches...

haha u really want one xmas? took me a whole weekend to built non stop...
I really like it. I'd want something for just one tank though. I think the shipping costs might be a deal breaker though. PM if you would be interested.
xmas_one is offline   Reply With Quote Quick reply to this message
Old 10-16-2013, 06:50 AM   #11
jsanz11
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2013
Location: Laredo, Tx
Posts: 5
Default

lol yes it is legot...
lets find out what shipping would be...putting together is fairly cheap
ill pm u xmas
jsanz11 is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:43 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012