Custom OTS filter for nano tank - Page 2
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 06-02-2013, 10:59 PM   #16
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default

Custom OTS filter for nano tank


Took a few cuttings of some emergent H glomeratus from an outdoor tub, and placed them between foam blocks in the filter box. Going to see if it will take and possibly grow into the tank.
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Sponsored Links
Advertisement
 
Old 06-16-2013, 06:51 PM   #17
tattooedfool83
Wannabe Guru
 
tattooedfool83's Avatar
 
PTrader: (8/100%)
Join Date: Mar 2013
Location: North Providence, RI
Posts: 1,817
Default

genius
tattooedfool83 is offline   Reply With Quote
Old 06-16-2013, 10:26 PM   #18
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default

Had fun putting it together but at the end of the day, it's just a glorified sponge filter.
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Old 08-14-2013, 04:33 PM   #19
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default OTS "Mattenfilter" for DBP 3L

I added a second 9mm glass intake pipe and opened up the valve on the Rio+ 90 powerhead to increase the flow rate. The "emersed" growth experiment on the top of the foam blocks worked with limited growth but because of the increased flow and the look I was trying to achieve was not what I expected, was removed. With this higher flow rate, the debris in this bare bottom tank is blown over to the filter side of the tank making vaccuming the bottom much easier during water changes (done w/ airline tubing rubberbanded to a wooden BBQ skewer).
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Old 11-06-2013, 07:07 AM   #20
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default OTS Mattenfilter Update

The foam pads have become even more clogged with debris from the tank and have slowly reduced flow. Adjusted by opening the the valve more to maintain filter box water level and flow thru the pads.

Still want to try having emersed growth coming out of the foam pads @ the surface of the filter box. The previous attempt with H glomeratus showed only limited growth and was not able to cope with changes in water level that occurred during filter operation. Had success with emersed growth of E tenellus in shaded outdoor tubs so, trimmed a couple of young submerged shoots from another project and inserted them between the foam pads. Hoping for better growth & plant nutrition with the trapped debris breakdown in the pads.
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Old 08-26-2014, 07:34 AM   #21
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default

Will be using this filter on a tank that will require CO2. Will be placing a small ceramic diffuser under the Rio 90+ intake. If I can get ahold of a 3D printer, would like to fabricate a larger diameter intake pipe & matching output. Anybody have any leads on lily pipe fabrication?
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Old 09-02-2014, 03:42 AM   #22
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 544
Default

Quote:
Originally Posted by BeastMaster View Post
Will be using this filter on a tank that will require CO2. Will be placing a small ceramic diffuser under the Rio 90+ intake. If I can get ahold of a 3D printer, would like to fabricate a larger diameter intake pipe & matching output. Anybody have any leads on lily pipe fabrication?

Placing the diffuser under the powerhead created clearance problems for the output glass pipe. Decided to place the diffuser under the foam pad "chamber". Hopefully this will increase contact time as the micro bubbles work their way up thru the foam. That's the theory. Will cut a small chamber in one of the foam pads for the diffuser head. May also retain the pendant LED fixture and modify it so the lamp is directly over the foam pads. May also try to grow Hydrocotyle on the top of the pads.


Sent from my iPhone using Tapatalk
__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:49 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012