Large preformed ponds? (I FOUND IT!!!)
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > General Planted Tank Discussion > Ponds


Reply
 
Thread Tools Display Modes
Old 09-04-2003, 01:40 AM   #1
Bert
Algae Grower
 
Bert's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2003
Location: Sachse, Texas
Posts: 81
Default

Hey guys! I'm not sure if this is the right board or even the right forum, but mabye you guys can help me out. For some reason I can remember seeing a post about extreamly large, preformed ponds. And I'm not talking big, I'm talkin freakin huge. There was a link to a site that sold these large ponds. If anybody can show me this post or a site that sells very large preformed pond, it would be greatly appreciated. Sorry if this is the wrong forum, but this site just seemed to stick out in my mind for some reason. Thanks!!

Bert
Bert is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-04-2003, 01:15 PM   #2
GulfCoastAquarian
Planted Tank VIP
 
GulfCoastAquarian's Avatar
 
PTrader: (6/100%)
Join Date: Jul 2002
Location: Winston-Salem, NC
Posts: 3,578
Send a message via ICQ to GulfCoastAquarian Send a message via Yahoo to GulfCoastAquarian
Default

I used a small (125g) preformed pond. I've seen them as big as 250g at Home Depot, but how big are we talking?
__________________
- Sam P -
plantedtanker in limbo - all tanks currently in storage
GulfCoastAquarian is offline   Reply With Quote
Old 09-05-2003, 02:02 AM   #3
Bert
Algae Grower
 
Bert's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2003
Location: Sachse, Texas
Posts: 81
Default

The pond I'm talking about were made out of steel i think. You could also buy concrete vats. It was like a site for fish farm supplies. the ponds were up to 20,000 gallons. I'm obviousley no looking to buy a 20,000 gallon steel pond, but I might like to find something a little more managable. Thanks again for any help.

Bert
Bert is offline   Reply With Quote
Old 09-05-2003, 02:22 AM   #4
m.lemay
Planted Tank Guru
 
m.lemay's Avatar
 
PTrader: (9/100%)
Join Date: Jul 2002
Location: Naugatuck, CT.
Posts: 2,647
Default

Why not just dig a big hole and line it with betonite clay or better yet a rubber liner. Its got to be cheaper than a steel pond and a lot more user friendly. Just my $.02.

Marcel
__________________
FILSTAR Pimp #2

75 gal heavily planted,50/50 Black beauty,Eco-complete substrate, Pressurised CO2 with solenoid, ph controller, AB Reactor 1000, 330 watts 9325K GE PC lighting,Ehiem Liquidoser, 2-Filstar xp3 canisters.
m.lemay is offline   Reply With Quote
Old 09-05-2003, 02:25 AM   #5
evan
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jul 2003
Location: Dallas, Texas
Posts: 319
Default

i have a pond in my backyard that i was going to tear down. i took out the liner and stuff, but now the water still sits there, so its a natural pond now. weird. i even have a fish that i through in to see if it would survive. so far so good. don't have to feed or clean or anything.
evan is offline   Reply With Quote
Old 09-05-2003, 01:37 PM   #6
Bert
Algae Grower
 
Bert's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2003
Location: Sachse, Texas
Posts: 81
Default

I was just wondering if you guys could show me a site or the post, but I guess I got the wrong forum. Sorry for the trouble. Thanks.

Bert
Bert is offline   Reply With Quote
Old 09-06-2003, 02:17 AM   #7
Buck
Planted Tank VIP
 
PTrader: (3/100%)
Join Date: Oct 2002
Location: Lebanon, CT
Posts: 4,939
Default

hmmmm,
I thought the big hole with clay lining or rubber was an excellent suggestion. I am thinking of pouring cement when I am ready... thats my # 1 choice right now.
__________________
Buck is offline   Reply With Quote
Old 09-17-2003, 10:59 PM   #8
Bert
Algae Grower
 
Bert's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2003
Location: Sachse, Texas
Posts: 81
Default

Sweet!!! I found the site!!!! It www.aquatic-eco.com . Just look under ponds and then under tanks and liners and you can find everything from fiberglass vats to 19,000 gallon storage tanks!! They're actually more affordable then you would think, and a lot easier on the back then digging a 30ft. wide 4ft. deep hole in the ground! Thanks for trying to help guys! I hope this helps someone....somehow....err.....yeah. Thanks again!

Bert
Bert is offline   Reply With Quote
Old 09-17-2003, 11:07 PM   #9
GDominy
Planted Tank VIP
 
GDominy's Avatar
 
PTrader: (0/0%)
Join Date: Jul 2002
Location: Victoria,British Columbia, Canada
Posts: 3,363
Default

Quote:
Originally Posted by Buck
I am thinking of pouring cement when I am ready... thats my # 1 choice right now.
I'm not a big fan of this route as the cement can actually be abbrasive to the fish. I agree that its an awesome way (structurally) to make a pond, but in practice it can cause grief. Using large EPDM/Rubber liners (although expensive) is generally a good way to go
GDominy is offline   Reply With Quote
Old 09-17-2003, 11:59 PM   #10
Buck
Planted Tank VIP
 
PTrader: (3/100%)
Join Date: Oct 2002
Location: Lebanon, CT
Posts: 4,939
Default

Ya still have to dig Bert, unless you build everything up around it... now you really have me confused.
__________________
Buck is offline   Reply With Quote
Old 09-18-2003, 12:01 AM   #11
Buck
Planted Tank VIP
 
PTrader: (3/100%)
Join Date: Oct 2002
Location: Lebanon, CT
Posts: 4,939
Default

As far as the cement bottom goes, it will have at least a 2" base of sand throughout it Gareth..... not left as cement.
__________________
Buck is offline   Reply With Quote
Old 09-18-2003, 01:32 AM   #12
anonapersona
Wannabe Guru
 
PTrader: (0/0%)
Join Date: Oct 2002
Location: Houston, TX
Posts: 1,614
Default

I got a 300 gallon galvanized metal stock tank at the local Feed store for $75. 5' diam x 2' tall. With an exit plug at the bottom.

My pond at homeis made of this, lined with EPDM, surrounded with 2"fence posts and metal banding. If I had it all to do over again, I'd use that plug to run an external pump and filter perhaps.
anonapersona is offline   Reply With Quote
Old 09-18-2003, 01:45 AM   #13
Bert
Algae Grower
 
Bert's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2003
Location: Sachse, Texas
Posts: 81
Default

Quote:
Tanks may be partially buried to conserve heat and make fish observations easier.
I read the entire page and it says nothing about having to burry the tank. You will have to dig out for the concrete base, but I'd rent a bobcat for that . Especialy for a 30ft., 19,000 gallon, steel tank.

I'm not seriously thinking about getting one of these monsters. Atleast not until I'm a millionair!! It is just a fantisy I have and I think we all have. You know, to have the biggest tank you could ever imagine. Oh well, I guess its back to dreaming!

Bert
Bert is offline   Reply With Quote
Old 01-07-2004, 03:48 AM   #14
Zurp
Planted Member
 
Zurp's Avatar
 
PTrader: (0/0%)
Join Date: Sep 2003
Location: Enfield, Connecticut
Posts: 292
Default

Buck, search for cement pond issues... Besides PH issues, from the high lime content, there are issues with... Black Algae, leaking, major stress cracks, you also need a steel frame. Arg, Fiberglass would be my first choice, followed by a natural clay brick and plastic tarped pond. Use the plastic under the clay and clay brick, not on top of it. Built like the reflection pool in Washington D.C., not like a classic slope banked pond.

Eventually the plastic will rot and crack, but will still help the clay retain water levels. Just don't build this within 80 feet of a fir tree, it will suck the pond dry and destroy the liner. (Sap and plastic don't mix, same with lime in cement!)
__________________
20Gal. Long (Green-House) and 55Gal. Tall (Primary Tank)
4 Fire-Belly Toads, 2 Fire-Belly Newts,
2 Giant Black Millipedes, 1 Grey Tiger Salamander
Zurp is offline   Reply With Quote
Old 05-03-2004, 02:21 PM   #15
greendragon
Algae Grower
 
PTrader: (0/0%)
Join Date: Jan 2004
Posts: 53
Default

The bad thing with cement is that it will buffer the ph up because of the lime content. You may need to dose with phosphric acid to get it down. The best bet is a rubber or PVC liner.

steve
greendragon is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Found some new wood.... Overfloater General Planted Tank Discussion 2 08-06-2004 02:27 AM
Algae Eating Fish For A Very Large Outisde Pond lokobreed Ponds 4 07-14-2004 02:26 PM
Large Natural Spring Fed Ponds trace_lynn Ponds 3 01-07-2004 02:04 AM


All times are GMT. The time now is 10:39 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012