|
||||||||||||||||
|
||||||||||||||||
|
|
#1 |
|
Algae Grower
|
CO2 help needed
Anyone use or have an opinion on the below DD co2 set? it will be for my Rio 180.
http://www.charterhouse-aquatics.co....er-p-2435.html Posted from Plantedtank.net App for Android |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Moderator
|
Disposable cartridges usually do not last very long, and are quite expensive in the long run. On a Rio 180, 600 grams of gas will not last that long. I would recommend a larger cylinder (perhaps 5 pounds (~2.2 kg)) at the very least.
In addition, the regulator and needle wheel may not be of the highest quality, so you may experience difficulty with adjusting/the stability of the CO2.
__________________
Anthony
A Primer to Pressurized CO2 and A Primer to Planted Tanks Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Ehein 2217, Eheim surface skimmer and Eheim autofeeder. Victor Pimp #33 - HPT272-125-350-4M |
|
|
|
|
|
#3 |
|
Algae Grower
|
thanks Darkblade, is there a "set" that you would recommend? quiet new to this!
Posted from Plantedtank.net App for Android |
|
|
|
|
|
#4 | |
|
Moderator
|
Quote:
Another problem is that you are in the UK, North American standards for CO2 cylinders are different from European ones, so the kits that would work here will not work in the UK.
__________________
Anthony
A Primer to Pressurized CO2 and A Primer to Planted Tanks Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Ehein 2217, Eheim surface skimmer and Eheim autofeeder. Victor Pimp #33 - HPT272-125-350-4M |
|
|
|
|
|
|
#5 |
|
Wannabe Guru
|
You can build one yourself, check darkblade's or oldpunk's DIY instruction threads.
It is fairly easy to find the parts in UK, a evilbay double stage regulator with UK standard bull nose CO2 tank connector, plus the BST threads solenoid, swagelok metering valve(UK evilbay).
__________________
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|