|
||||||||||||||||
|
||||||||||||||||
|
|
#1 |
|
Planted Tank Guru
|
will this plan work?![]() My plan would be to build a wood frame out of 1x1s, held together with screws and flat L brackets. I would attach a plexiglass center brace to it. This DIY frame would then be placed around the existing plastic frame and super glued to it. This is for a 75 gallon tank, with a plastic frame that has cracks at all 4 corners, missing a couple sections along the back and side, and has a crack in along the front of the center brace. Yes, I have looked into buying a replacement frame, but have been told by many sources they are specific to the brand of tank. I can't determine the brand of tank so here is the DIY idea. |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Planted Tank Enthusiast
|
Your basic concept looks reasonable, but I think using wood near the water line is asking for trouble. Wood fibers tends to swell and distort with changes in humidity.
++sigh++ But to be brutally honest, do you have any idea how much work it is to clean up water damage? It's a nightmare! My LFS has 75's on sale for 85 bucks! I really think this is "false economy" and bordering on Russian roulette. If you were just using this tank in the garage as a minnow live well, I'd say "Go for it, who cares if the thing explodes!" But inside a home, this is a gamble I wouldn't take... But that's just me. I mean for less than the cost of a good canister filter you can replace the entire tank: I'd just do that rather than risking a repair job. Be sure to post pics if you attempt the repair! |
|
|
|
|
|
#3 | |
|
Planted Tank Guru
|
Quote:
I would be finishing the wood with waterproof seal. |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|