DIY CO2 Rig, take a look...
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 12-20-2013, 06:37 PM   #1
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

DIY CO2 Rig, take a look...


Does anyone see any flaws with this?

2x 2L pop bottles
1x Air valve
1x Air tubing

Used this mixture:
2cups of regular sugar
1/4th tsp of Baking Soda
1/4th tsp of Yeast -> expires in 2014
Warm water, not hot water.

Bottles are air tight so hopefully no leaks, this is for a 10gal tank.
waiting for any co2 to be created.


wish me luck
boxboy is online now   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-20-2013, 06:40 PM   #2
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

So hopefully this works for now...
boxboy is online now   Reply With Quote Quick reply to this message
Old 12-20-2013, 06:45 PM   #3
Aqualady
Planted Tank Enthusiast
 
Aqualady's Avatar
 
PTrader: (2/100%)
Join Date: Jan 2013
Location: Tulsa, Oklahoma
Posts: 818
Default

Looks good. You can spray water around all tubing and if it bubbles then you may want to silicone around it.
Aqualady is offline   Reply With Quote Quick reply to this message
Old 12-20-2013, 07:01 PM   #4
Bushkill
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Feb 2012
Location: Bushkill, Pa
Posts: 707
Default

A cheap way to make water and airtight connections is to drill a hole in the cap to the exact outter dimension of silicone tubing. Place a short length of rigid silicone airline tubing (1/2" or so) over a short length of rigid airline tubing (1 1/2" or so). Force the end with the silicone tubing into the hole drilled into the cap. Then you can attach airline to the opposite end. Gives you a fit at the cap that's incredibly tight and durable and you don't have to worry about sealing the connection at the cap.
Bushkill is offline   Reply With Quote Quick reply to this message
Old 12-20-2013, 07:16 PM   #5
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

Yep thats what I did... Drilled holes a little smaller then the air line and forced it through so its air tight.
the Valve on the cap is the same deal, however its not glued because if something gets blocked and the pressure builds, I would hope the valve would just pop off instead of large messy BANG lol
Waiting for this to make co2 is killing me lol

Anyone have ideas in how to enject the co2 into the tank without having a diffuser on hand?
boxboy is online now   Reply With Quote Quick reply to this message
Old 12-20-2013, 09:08 PM   #6
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

I got bubbles but soon as the tube went into the tank the added pressure stoped the bubbles.
maybe I just need more yeast in the mixture???
boxboy is online now   Reply With Quote Quick reply to this message
Old 12-20-2013, 09:15 PM   #7
thinBear
Planted Member
 
thinBear's Avatar
 
PTrader: (0/0%)
Join Date: Dec 2011
Location: Bay Area, CA
Posts: 237
Default

i rather not break the seal, that means you will need to wait the pressure to build up again.

yeast will reproduce and multiply by itself, providing suitable environment

a warm water bath (make sure not exceed the optimal temp. and kill the yeast) can speed up the growth of yeast (warmth expand the gas as well, but that's just an illusion :p)

my 2c
__________________
thinBear is online now   Reply With Quote Quick reply to this message
Old 12-20-2013, 11:28 PM   #8
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

I just left it alone and its now got 1bubble per 1.5seconds or so.
I got it running at night But I DO have a air bubbler going with alot of surface movment, so I am not worried about gassing the 1 fish. Hes still realxing near the bottom.
boxboy is online now   Reply With Quote Quick reply to this message
Old 12-21-2013, 02:02 AM   #9
TekWarren
Planted Tank Enthusiast
 
PTrader: (5/100%)
Join Date: Oct 2013
Location: Twin lake, MI
Posts: 641
Default

I tried using a valve like that and it ended up leaking. Save yourself the headache and get rid of it. Also use a smaller bubble counter or fill up that second 2 liter a lot more, you want as much co2 going to the tank as possible not sitting in that huge cavity in the bottle.
TekWarren is online now   Reply With Quote Quick reply to this message
Old 12-21-2013, 02:07 AM   #10
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

Quote:
Originally Posted by TekWarren View Post
I tried using a valve like that and it ended up leaking. Save yourself the headache and get rid of it. Also use a smaller bubble counter or fill up that second 2 liter a lot more, you want as much co2 going to the tank as possible not sitting in that huge cavity in the bottle.
Thanks I will get an actual bubble counter + check valve.
for now I will fill the 2nd bottle with more water...
boxboy is online now   Reply With Quote Quick reply to this message
Old 12-21-2013, 08:10 PM   #11
boxboy
Planted Tank Obsessed
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Canada
Posts: 363
Default

For now I switched out the 2nd bottle for a 350ml bottle, filled 2" from the top...
Also removed the valve, I noticed that it was leaking, its now sealed.

I find that its producing about 1 bubble every 2seconds or so, is there anyway to make it get to 1 bubble per 1 second?
boxboy is online now   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:41 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012