Fluval Solenoid Add On
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 02-22-2012, 02:33 AM   #1
rOCKETGAR
Newbie
 
PTrader: (0/0%)
Join Date: Feb 2012
Location: riverside,ca
Posts: 4
Default

Fluval Solenoid Add On


Hey, for everyone that has a Fluval 88g. I just found a solenoid that works. Ive been search for a few days. But I found a good candidate off marinedepot.com
Its called the "Replacement Solenoid" for 49.99 During installation I didnt have a 1/8npt to 1/8 npt fittings. But I used the 1/8 barb that the Fluval came with. Just had to chop off the hose barb flush with some pliers sanded down the remains with 80grit sandpaper. Also purchase the "Needle Valve" on M.D. Here are some pics. I hope this helps also gonna do a ebos to paintball fitting for the tank next week. Reminder if you do this modification. Turn up the stock pressure all the way and adjustments on the new needle valve. the flow should go in this order.

CO2 Source>REGULATOR>StockVavle(ON the Fully Open Position)(right side of the regulator)> SOLENOID SIDE A(from left side of regulator)> NEW NEEDLE VALVE(solenoid side B)(ADJUST TO YOUR OWN BBM)>BUBBLE COUNTER> REACTOR.


The new needle vavle when adjusted to the full pressure load release by the solenoid,wont burst co2 in your aquarium if done in this order. because its is regulating flow at max pressure.

Last edited by rOCKETGAR; 02-22-2012 at 02:36 AM.. Reason: images
rOCKETGAR is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-22-2012, 04:06 PM   #2
ThatPlecoDude
Newbie
 
ThatPlecoDude's Avatar
 
PTrader: (1/100%)
Join Date: Feb 2012
Location: St. Louis, MO
Posts: 4
Default

I have been looking for somebody who was going to do this, you should definitly do an update on how you did the tank refitting.
ThatPlecoDude is offline   Reply With Quote
Old 02-22-2012, 04:09 PM   #3
rOCKETGAR
Newbie
 
PTrader: (0/0%)
Join Date: Feb 2012
Location: riverside,ca
Posts: 4
Default

Ill post some pictures up! its pretty easy. took me less then 10mins. but worth the investment. i dont have time to turn on and off my co2 system. im also gonna do a ebos 88g to 24oz ball adapter conversion.
rOCKETGAR is offline   Reply With Quote
Reply

Tags
88g, co2, fluval, solenoid

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:07 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012