CBG's 6G Fluval Edge Planted Tank With 10G Sump (Pic Heavy)
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 09-30-2011, 03:34 PM   #1
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

CBG's 6G Fluval Edge Planted Tank With 10G Sump (Pic Heavy)


This is actually my original Fluval Edge that I have had for quite some time now. Finally getting around to actually putting this into a journal. Though I have had this particular tank quite a bit before my Fluval Edge salt FOWLR I never got around to doing modifications to it until recently.
Started out with the stock tank and used a Zoomed 501 mini canister filter hidden in the back of the tank for the initial setup which did a decent job but it didnt quite fit in there. You can see the slight bulge of the plastic

CGY_Betta_Guy is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-30-2011, 03:35 PM   #2
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

I replaced the stock halogen lighting with MR11 LED SMD light bulbs as most other people had been doing. I also made a supplemental U shaped LED light that wraps around the top of the tank out of an automotive LED light strip covered in shelf edging from the hardware store. You can refer to my DIY moonlight thread to see more info about the LED light strips.






And what it looks like on top of the tank. Gives me decent lighting all the way around the perimeter of the Edge tank.
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:36 PM   #3
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110726
Back in July I finally got around to modifying the tank in the same manner as my SW FOWLR. A new over flow and 10G sump were attached to increase the water volume of the system. The only extra feature that this tank has that the SW tank doesnt is the addition of a spot where I can mount a sponge to hopefully keep baby shrimps from making it down into the sump. Here you can see from the back side looking towards the tank where the overflow holes are drilled into the rim. The foam shown is just cut from a filter foam block and is held up to the overflow holes by 2 acrylic tabs that stick out. In hind sight I probably should have made this one whole peice that goes across since the sponge sorta sags in the middle with water going through it.
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:36 PM   #4
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110830
This tank has only had fish in it maybe twice since I bought it with the rest of the time being devoted to shrimp keeping. I had been trying without much success to have baby CRS survive more than a few days and only recently have I seen progress on that front. I was surprised when these guys emerged so and looking so nice! I will credit the new sump for that!


CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:37 PM   #5
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110905
just under a week later



I am expecting plenty more



20110913
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:37 PM   #6
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110914
I just recently decided to take a different direction with this little Edge tank in order to make it easier to maintain and not get overgrown like crazy. Planting smaller plants that wont outgrow the tank will hopefully help me with that.

This is what the tank looked like back on 20100604



and what it looks like today



A pic with 10 gallon sump and plant storage/planting area. I am planning on having the sump with a reverse photoperiod to the tank so that nutrient uptake and oxygen production is fairly steady. Not sure if it will be that beneficial or not but figured I would see.



next to the SW tank

CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:38 PM   #7
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110915
just some close up pics of the tank itself



CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 03:39 PM   #8
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

20110930

Quick update... things seem to be growing in ok.
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 04:17 PM   #9
urbguy
Planted Tank Obsessed
 
urbguy's Avatar
 
PTrader: (1/100%)
Join Date: Sep 2009
Location: Fairfax, Virginia
Posts: 395
Default

Betta Guy:

Nice lights. I have to admit you must have put alot of effort in making the supplemental u shaped LED lights. It looks to be quite clean (I mean the LEDs with the shelf edging), far cleaner than I've seen.

You're the first I've seen placing pennyworts into their edge. They grow very quickly. Can't wait to see it all filled in.
__________________
urbguy is offline   Reply With Quote
Old 09-30-2011, 04:33 PM   #10
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

Thanks, yeah I like my u shaped LED. Its definitely helping grow plants out on the outer parts of the tank. I just wish my HC would take root so I dont have to keep replanting it. I am sure the shrimp are pulling it up or it could be the MTS.

The pennywort was bought years ago and ended up in my tank for a while and it sent out lots of runners. When I did the rescape I moved it into the sump to store it temporarily.
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 04:43 PM   #11
urbguy
Planted Tank Obsessed
 
urbguy's Avatar
 
PTrader: (1/100%)
Join Date: Sep 2009
Location: Fairfax, Virginia
Posts: 395
Default

Oh ok, it's definitely your shrimp pulling them out. How long have you planted your HC?
__________________
urbguy is offline   Reply With Quote
Old 09-30-2011, 05:12 PM   #12
CGY_Betta_Guy
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2010
Location: Calgary, Alberta, Canada
Posts: 100
Default

Its been a couple weeks. Some of it does look like its starting to grow low and solid... some just keeps getting pulled out. I guess patience is the key.
CGY_Betta_Guy is offline   Reply With Quote
Old 09-30-2011, 05:20 PM   #13
urbguy
Planted Tank Obsessed
 
urbguy's Avatar
 
PTrader: (1/100%)
Join Date: Sep 2009
Location: Fairfax, Virginia
Posts: 395
Default

It really is. Even now, i feel like it's really established but some just came up last night.
__________________
urbguy is offline   Reply With Quote
Old 09-30-2011, 05:22 PM   #14
2in10
Planted Tank Guru
 
2in10's Avatar
 
PTrader: (4/100%)
Join Date: Feb 2011
Location: Sparks, NV
Posts: 2,585
Default

Very nice job on the lights, great idea, tank looks very good
2in10 is offline   Reply With Quote
Old 09-30-2011, 06:55 PM   #15
Drema
Algae Grower
 
Drema's Avatar
 
PTrader: (0/0%)
Join Date: May 2011
Location: Alabama,USA
Posts: 128
Default

I love the planted tank beside the sw tank. What a wonderful and complete viewing experience.
Drema is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:03 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012