Power supply question.
Hi guys. So I just picked up a used edge on craigslist for $55 and got real excited a day later found out there was a little crack that show a little piece of silicone on the bottom right corner and there goes my mood swing I immediately tested the water and it was fine but I had some extra acrylic so I patched it up plus more silicone on the inside so I was happy again ! Sorry about the mislead just wanna share it. So my question for now is That I ordered 2 12v mr16 led+ sockets (6w total)and 3 12v led strips (18LED = 18w) so total with the mr16 and 3 strips I have total 24w would I be able to connect all that to my power supply from the original edge to get the max powering the bulbs?
Thanks in advance