Paintball Co2 Injection DIY Setup with Tons of Photos - Page 88
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 02-11-2011, 12:52 AM   #1306
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Quote:
Originally Posted by aerisxaria View Post
sounds good guys! thanks for the input



if i've read correctly from this thread, the hardware to go along with the swagelok valve are
Watts A-700
Watts A-22

OR

Watts A-29
Watts A-706

let me know if there's other ways to go about it
That is correct, it's pretty simple as well if you take your Needle Valve to Homedepot or Lowes. While you stand there in the plumbing isle, you'll figure out what you'lll need.

The above parts are not set in stone, they're are other ways to go about this. It's just the above parts, is what I found to work. I am sure there are many other parts that can be bought at Homedepot or Lowes that will complete the setup as well.

Quote:
Originally Posted by do00ber View Post
BTW, jagged it finally worked with the 32 degrees on/off..i took out the side with the allen key and put the guage there with my swagelok on the other side. 1bps and the diffuser is pumping..wooo..thanks again for all ur help
Your welcome.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-12-2011, 02:39 AM   #1307
Jeffww
Planted Tank Guru
 
PTrader: (9/100%)
Join Date: Aug 2010
Location: Houston
Posts: 2,258
Default

How is the CO2 tubing labeled at HD? I saw vinyl and polyethylene tubing. No "Co2 tubing"
Jeffww is offline   Reply With Quote
Old 02-12-2011, 04:39 AM   #1308
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Quote:
Originally Posted by Jeffww View Post
How is the CO2 tubing labeled at HD? I saw vinyl and polyethylene tubing. No "Co2 tubing"
Taken from a few pages back. It will be labeled "DO NOT USE FOR ICE MAKER". The below is more detailed descriptions, part number, and price.

Homedepot Co2 Tubing size is the following.

Brand: Watts
Product Number: SVEB10
Product Size: 1/4 ODX. 170IDX 10'Feet Vinyl Tubing
Price for 10' Feet is $2.14


On the Watts tag/sticker piece that is on the Co2 tubing. It states Handles chemical, gases and liquids. Employee states it will work for co2 applications.

NOTE: It's the SMALLEST size tubing that they have there that is CLEAR under the BRASS COUPLERS AND VALVES IN PLUMBING!!
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-12-2011, 04:06 PM   #1309
gnovince
Algae Grower
 
gnovince's Avatar
 
PTrader: (0/0%)
Join Date: Dec 2010
Location: Northeast Ohio
Posts: 49
Default

Ok, so I got the mini-asa installed and setup for two days without any problems! So if anyone is able to get for free like me or have one laying around it works! I am using the swagelok valve with watts A-29, and watts A-706 connection pieces. I guess this could be useful is someone needed a few extra inches in a tight spot! This asa on/off is made by Custom Products and is 2 1/2 inches tall.
Attached Thumbnails
Click image for larger version

Name:	DSCN1476.jpg
Views:	24
Size:	70.6 KB
ID:	27619  


Last edited by gnovince; 02-12-2011 at 09:11 PM..
gnovince is offline   Reply With Quote
Old 02-13-2011, 02:12 AM   #1310
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

Look greats. Good work on the Teflon tape. Looks plentiful.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-13-2011, 04:48 AM   #1311
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

The power of Paintball Co2 Setup!

This tank was setup the less than 5 days ago from scratch. New Tank, New Substrate, Glosso re-planting from another tank.

1st day after filling it up with water.


5th days from the first day.




I'm getting a little bit of algae on the side glass, using a 48 watts T5HO lighting is probably the cause of this. But the growth is just crazy fast. I'm sure within a few more days, it will fully cover the substrate!
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-13-2011, 02:49 PM   #1312
e.wan
Algae Grower
 
PTrader: (0/0%)
Join Date: Jan 2011
Location: Calgary, Canada
Posts: 43
Default

Are you guys using the asa on/off to turn you co2 off at night?
e.wan is offline   Reply With Quote
Old 02-13-2011, 02:50 PM   #1313
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

You can if you want. Or you can close off your Needle Valve instead. I leaves mine 24/7.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-13-2011, 05:35 PM   #1314
forrestp38829
Planted Member
 
forrestp38829's Avatar
 
PTrader: (25/100%)
Join Date: Nov 2010
Location: memphis tn
Posts: 281
Default

Forgive the question, but is it proper to leave the primary valve open all the way, and only adjust the needle valve?
I think that is right, from what I have gathered.
forrestp38829 is offline   Reply With Quote
Old 02-13-2011, 05:37 PM   #1315
sailnut
Algae Grower
 
PTrader: (1/100%)
Join Date: Nov 2010
Location: New York City
Posts: 127
Default

Quote:
Originally Posted by forrestp38829 View Post
Forgive the question, but is it proper to leave the primary valve open all the way, and only adjust the needle valve?
I think that is right, from what I have gathered.
Yes the ASA valve is an on/off device don't try to modulate the flow with it.
sailnut is offline   Reply With Quote
Old 02-13-2011, 05:58 PM   #1316
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

If you want to turn it off, you can get away with it by closing off your Needle Valve. Re-open it when you need it. Fairly easy to adjust. Doesn't take no more than a minute or less to adjust. I can get mines to adjust in 10-20 seconds.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-14-2011, 03:50 AM   #1317
e.wan
Algae Grower
 
PTrader: (0/0%)
Join Date: Jan 2011
Location: Calgary, Canada
Posts: 43
Default

what do you think the output line pressure is on one of these paintball setups?
anyone here running one of the new co2 atomizers that need at least 30psi?
e.wan is offline   Reply With Quote
Old 02-14-2011, 04:30 AM   #1318
Jaggedfury
Twin Turbo Lexus SC300
 
Jaggedfury's Avatar
 
PTrader: (135/100%)
Join Date: Sep 2010
Location: Sacramento, California
Posts: 1,912
Default

I'm still looking for couplers to answer your first questions so I can add a 2nd gauge inbetween 2 Needle Valves and see what it is.

This morning wasn't successful, I just stood at Homedepot over pondering parts that they didn't have.

For a couple to fit onto the end output of the Needle Valve's 1/4'' compression, You will need a 1/4'' to 1/8'' reducer. The 1/4'' to 1/8'' reducer is needed inorder to use a Watts A-715 LF Brass PIpe 1/8'' Close. From there you'll be able to use Watts A-704 LF Female Pipe Tee 1/8'' 3 ports. From there, the 2nd Gauge can be placed on the Watts A-704 1/8'' Tee. Then from t here, you'll need to find a 1/8'' by 1/8'' Female Pass through. Last but not least, you can finally screw in your 2nd Needle Valve onto the 1/8'' by 1/8'' Female Pass through.

The Homedepot did not carry all the parts above for me to get results. it's missing the 1/4'' by 1/8'' compression reducer. I was hoping to place 2nd gauge onto the setup where the 2nd gauge reads 0-30 psi. Being as it counts in increment marks of 1 psi. Then from there I will be able to tell you the output line pressure path.

It gets confusing but here's a picture of what I"m trying to rig up to show the output pressure. It's not quite functional yet.
__________________
She winks, Let's dance.

Jaggedfury is offline   Reply With Quote
Old 02-14-2011, 05:11 AM   #1319
e.wan
Algae Grower
 
PTrader: (0/0%)
Join Date: Jan 2011
Location: Calgary, Canada
Posts: 43
Default

A+ for effort at least. Im sure youll nail the setup jfurry!
e.wan is offline   Reply With Quote
Old 02-14-2011, 02:31 PM   #1320
Loligo
Algae Grower
 
Loligo's Avatar
 
PTrader: (9/100%)
Join Date: Jan 2011
Location: Ohio
Posts: 92
Send a message via AIM to Loligo
Default

Glosso is looking good! I should be getting my setup from you today, I'm excited! I have all the other pieces sitting here waiting.
Loligo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:37 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012