Azoo Regulator

mmreinhardmiller · 07-20-2010, 12:56 AM

I just received mine. Bought a permaseal from GLA and well as their brass check valve. Got GLA's Sprio 9900 combo bubble counter/diffuser. Like many, my working pressure on the gauge is about 40 PSI. While on the high side, I use the needle valve to tune it down but it seems that the pressure is still so high that it forces the water out of the bubble counter and the thing burps huge bubbles. Any thoughts on where my problem might be? Spent hours with GLA diagnosing but they kept remarking about my working pressure. I understand that but we know the Azoo Regs have it fixed at 40 PSI.

Any help would be appreciated...

Mike

msc · 07-20-2010, 01:34 AM

Believe that you can take the front cover off. Then you will find a hex screw that you can adjust the working pressure.

07-20-2010, 12:56 AM	#1
mmreinhardmiller Algae Grower (View User Tanks) PTrader: (0/0%) Join Date: Aug 2008 Location: Arlington, VA Posts: 6	Azoo Regulator I just received mine. Bought a permaseal from GLA and well as their brass check valve. Got GLA's Sprio 9900 combo bubble counter/diffuser. Like many, my working pressure on the gauge is about 40 PSI. While on the high side, I use the needle valve to tune it down but it seems that the pressure is still so high that it forces the water out of the bubble counter and the thing burps huge bubbles. Any thoughts on where my problem might be? Spent hours with GLA diagnosing but they kept remarking about my working pressure. I understand that but we know the Azoo Regs have it fixed at 40 PSI. Any help would be appreciated... Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-20-2010, 01:34 AM	#2
msc Planted Member (View User Tanks) PTrader: (12/100%) Join Date: Mar 2008 Location: South Central, MA. Posts: 291	Believe that you can take the front cover off. Then you will find a hex screw that you can adjust the working pressure.