Cerges' Reactor - DIY Inline CO2 Reactor - Page 27
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 06-15-2012, 07:33 PM   #391
shrimpNewbie
Wannabe Guru
 
shrimpNewbie's Avatar
 
PTrader: (4/100%)
Join Date: May 2011
Location: california, orange county
Posts: 1,891
Default

Get a check valve from petsmart
shrimpNewbie is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-15-2012, 07:37 PM   #392
audioaficionado
Planted Tank Guru
 
audioaficionado's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2011
Location: Medford, Orygun
Posts: 2,198
Default

@fattboa
You've got to have a check valve or as the CO2 in the line dissolves, the water will always creep up into your washer bottle. Plastic check valves are pretty cheap in the local tropical fish stores in the USA. You need a check valve that has a low forward cracking pressure. Get a plastic, stainless steel or brass valve with 1 psi or lower cracking pressure if you can.
__________________
Steve

45 gal tall high-tech : 2-23-12 update
Complete CO2 Leak Test : How to build a CO2 regulator


Never argue with a fool. Onlookers often can't tell the difference.
Growing older is mandatory, growing up is optional.
My advice is free and worth every penny.
audioaficionado is offline   Reply With Quote Quick reply to this message
Old 06-15-2012, 07:41 PM   #393
fattboa
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Kuwait
Posts: 55
Default

Quote:
Originally Posted by audioaficionado View Post
@fattboa
You've got to have a check valve or as the CO2 in the line dissolves, the water will always creep up into your washer bottle. Plastic check valves are pretty cheap in the local tropical fish stores in the USA. You need a check valve that has a low forward cracking pressure. Get a plastic, stainless steel or brass valve with 1 psi or lower cracking pressure if you can.
I can blow past the check valve but I am not sure if the little yeast can.
Availability is a huge issue here, well except for chain restaurants. Local fish stores here do not know or have anything. This is the only check valve I found. I'll look harder.
Thank you
fattboa is offline   Reply With Quote Quick reply to this message
Old 06-15-2012, 07:45 PM   #394
audioaficionado
Planted Tank Guru
 
audioaficionado's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2011
Location: Medford, Orygun
Posts: 2,198
Default

Your yeast will generate plenty of pressure. No worries there. It has blown up pop bottles and other strong sealed containers. Sounds like you should try your brass valve anyway. If you can blow through it in only one direction, make sure the forward direction is towards the reactor, not the yeast. Also place it after the gas washing bottle to keep the gunk out of it.
__________________
Steve

45 gal tall high-tech : 2-23-12 update
Complete CO2 Leak Test : How to build a CO2 regulator


Never argue with a fool. Onlookers often can't tell the difference.
Growing older is mandatory, growing up is optional.
My advice is free and worth every penny.
audioaficionado is offline   Reply With Quote Quick reply to this message
Old 06-15-2012, 08:31 PM   #395
fattboa
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Kuwait
Posts: 55
Default

Quote:
Originally Posted by audioaficionado View Post
Your yeast will generate plenty of pressure. No worries there. It has blown up pop bottles and other strong sealed containers. Sounds like you should try your brass valve anyway. If you can blow through it in only one direction, make sure the forward direction is towards the reactor, not the yeast. Also place it after the gas washing bottle to keep the gunk out of it.
The orientation is correct. It is placed after the gas separator before the input at the reactor.
I can blow past the valve it at half effort. If the yeast can blow up soda bottles they certainly should work. I'll try adding silicone to the air holes I created.
Tomorrow Ill look for a regulator and a CO2 cansiter at the everything-flea-market.
Thank you very much for your help and prompt replies.
fattboa is offline   Reply With Quote Quick reply to this message
Old 06-17-2012, 10:19 PM   #396
moogleii
Newbie
 
PTrader: (0/0%)
Join Date: Jan 2011
Location: Irvine, CA
Posts: 4
Default

For future reference, Watts 7/8" ID washer/dishwasher hose fits very snugly in GE (and I believe Whirlpool) filters. No need for glue.
moogleii is offline   Reply With Quote Quick reply to this message
Old 06-18-2012, 01:24 PM   #397
aquatic serenity
Algae Grower
 
PTrader: (2/100%)
Join Date: May 2011
Location: delaware
Posts: 118
Default

Finally hooked up my 20" version this past weekend ...this thing is way better than the aquariumplants.com version I originally had...you dont need that internal pump they squeeze in there..its complete nonsense...in my unit the CO2 completely dissolves and saturates the water in the 20" tube...I can pump all the CO2 I want in there...
I'll try & post some pics before the week is over...
aquatic serenity is offline   Reply With Quote Quick reply to this message
Old 06-18-2012, 09:08 PM   #398
inkslinger
Wannabe Guru
 
PTrader: (1/100%)
Join Date: Dec 2003
Location: Taunton ,MA
Posts: 1,694
Default

Quote:
Originally Posted by aquatic serenity View Post
Finally hooked up my 20" version this past weekend ...this thing is way better than the aquariumplants.com version I originally had...you dont need that internal pump they squeeze in there..its complete nonsense...in my unit the CO2 completely dissolves and saturates the water in the 20" tube...I can pump all the CO2 I want in there...
I'll try & post some pics before the week is over...
What size pump or filter is being use with this? Did you get the 1" port or the 3/4" port?
inkslinger is offline   Reply With Quote Quick reply to this message
Old 06-18-2012, 09:30 PM   #399
audioaficionado
Planted Tank Guru
 
audioaficionado's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2011
Location: Medford, Orygun
Posts: 2,198
Default

I'm thinking I'd better snag one of those on E-bay for my future large tank. Show us some pictures of your Cerges' set up with that bad boy.
__________________
Steve

45 gal tall high-tech : 2-23-12 update
Complete CO2 Leak Test : How to build a CO2 regulator


Never argue with a fool. Onlookers often can't tell the difference.
Growing older is mandatory, growing up is optional.
My advice is free and worth every penny.
audioaficionado is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 01:07 AM   #400
hamato
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2008
Location: Canada
Posts: 70
Default

I know it was discussed earlier the merits of this for a 6g, but what about a 20g long? Filter is a Eheim 2215 (163 gph rating). I know it's probably overkill but I love DIY and as long as my filter will put out enough flow for it to work I'd build one
hamato is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 01:24 AM   #401
Jbuck
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Uk
Posts: 57
Default

Has anyone in uk built one of these from these instructions? Just wondering if someone knew of a readily available filter as the omni ob1 is only available from USA from what I have found


Juwel rio 180
2 angels
2 Siamese flying foxes
3 yo yo loaches
4 Julii corys
10 guppys
1 German blue ram
Jbuck is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 01:29 AM   #402
sketch804
Wannabe Guru
 
sketch804's Avatar
 
PTrader: (44/100%)
Join Date: Mar 2011
Location: Richmond, Virginia
Posts: 1,229
Default

Quote:
Originally Posted by hamato View Post
I know it was discussed earlier the merits of this for a 6g, but what about a 20g long? Filter is a Eheim 2215 (163 gph rating). I know it's probably overkill but I love DIY and as long as my filter will put out enough flow for it to work I'd build one
Now a 20gal sounds a lot better. I think it will work fine and Cerges reactor barely cuts flow down, least not enough to notice, just as long as its free from media. Good luck!
sketch804 is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 01:36 AM   #403
audioaficionado
Planted Tank Guru
 
audioaficionado's Avatar
 
PTrader: (9/100%)
Join Date: Apr 2011
Location: Medford, Orygun
Posts: 2,198
Default

Quote:
Originally Posted by hamato View Post
I know it was discussed earlier the merits of this for a 6g, but what about a 20g long? Filter is a Eheim 2215 (163 gph rating). I know it's probably overkill but I love DIY and as long as my filter will put out enough flow for it to work I'd build one
I'm running my reactor in series with a Marineland Magnum 350 and I don't have any flow restriction or filtration issues in my 45 gal tank.
__________________
Steve

45 gal tall high-tech : 2-23-12 update
Complete CO2 Leak Test : How to build a CO2 regulator


Never argue with a fool. Onlookers often can't tell the difference.
Growing older is mandatory, growing up is optional.
My advice is free and worth every penny.
audioaficionado is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 02:13 AM   #404
elwray
Planted Member
 
PTrader: (7/100%)
Join Date: Mar 2012
Location: NJ
Posts: 192
Default

Quote:
Originally Posted by audioaficionado View Post
I'm running my reactor in series with a Marineland Magnum 350 and I don't have any flow restriction or filtration issues in my 45 gal tank.
You could put a school bus in line with a Magnum 350 and not notice any restriction in flow Those things are pretty much tanks! They might not have the bells and whistles of "new" canisters, but I've had two running 24/7 for about 5+ years now with zero problems.
elwray is offline   Reply With Quote Quick reply to this message
Old 06-19-2012, 02:18 AM   #405
aquatic serenity
Algae Grower
 
PTrader: (2/100%)
Join Date: May 2011
Location: delaware
Posts: 118
Default

Quote:
Originally Posted by inkslinger View Post
What size pump or filter is being use with this? Did you get the 1" port or the 3/4" port?

Eheim 2217 ...3/4" port....
aquatic serenity is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:08 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012