
03042009, 08:25 PM  #1 
Planted Tank Guru

Calibrating Test Kits  for nonChemists
I received a request to write something like this, so: (I hope someone will check this for accuracy.)
Calibrating Test Kits Calibrating a test kit means using that kit to measure some water samples with known concentrations of the substance being tested for, and using those test results to verify that the test kit is accurate, or to train yourself to recognize the colors that correspond to the concentrations you want to test for. Hobby test kits are not laboratory quality tests. That means we don’t need extreme accuracy in the standard test solutions we use for calibration. If we have a good quality gram scale, with +/.01 gram accuracy, and good laboratory glass graduated cylinders to measure water volume, there are other articles that tell how to make very accurate standard solutions. The methods described here are for use with ordinary kitchen measuring equipment, measuring spoons and cups. And, the Fertilator calculator on APC was used to easily calculate how to mix these. Nitrate Test Kits First, buy a gallon of distilled water from your local grocery store. Use that to make the test standard solutions. 1. Add 1/4 teaspoon  a level measure, not a heaping measure  of KNO3 to 4 cups of distilled water (one quart). This gives you 4 cups of 800 ppm nitrate water. 2. Mix 1/4 cup of that 800 ppm water with 1 3/4 cups of distilled water. This gives you 2 cups of 100 ppm nitrate standard water. 3. Mix one cup of that 100 ppm water with one cup of distilled water. This gives you 2 cups of 50 ppm nitrate standard water. 4. Mix one cup of that 50 ppm water with one cup of distilled water. This gives you 2 cups of 25 ppm nitrate standard water. 5. Mix 1/2 cup of that 25 ppm water with 3/4 cup of distilled water. This gives you 1 1/4 cups of 10 ppm nitrate standard water. 6. Mix 1/4 cup of 25 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 5 ppm nitrate standard water. 7. Use your test kit to measure the nitrate concentration in each of the 5,10,25, and 50 ppm nitrate standards. If you wish, add the 100 ppm standard to that set. 8. Compare the colors of those to the color card for your kit, and either verify the accuracy of the kit, or use those colors to train yourself to recognize the colors. Your nitrate test kit is now calibrated. You can store the standard solutions in tightly sealed bottles for an indefinite period of time for future calibrations. Ideally, you calibrate the kit each time you use it. Phosphate Test Kits First, buy a gallon of distilled water from your local grocery store. Use that to make the test standard solutions. 1. Add 1/4 teaspoon  a level measure, not a heaping measure  of KH2PO4 to 4 cups of distilled water (one quart). This gives you 4 cups of 1000 ppm phosphate water. 2. Mix 1/4 cup of that 1000 ppm water with 2 1/4 cups of distilled water. This gives you 2 1/2 cups of 100 ppm phosphate standard water. 3. Mix one cup of that 100 ppm water with one cup of distilled water. This gives you 2 cups of 50 ppm phosphate standard water. 4. Mix one cup of that 50 ppm water with one cup of distilled water. This gives you 2 cups of 25 ppm phosphate standard water. 5. Mix 1/2 cup of that 25 ppm water with 3/4 cup of distilled water. This gives you 1 1/4 cups of 10 ppm phosphate standard water. 6. Mix 1/4 cup of 25 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 5 ppm phosphate standard water. 7. Mix 1/4 cup of 5 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 1 ppm phosphate standard water. 8. Use your test kit to measure the phosphate concentration in each of the 1,5,10, and 25 ppm phosphate standards. If you wish, add the 50 ppm standard to that set. 9. Compare the colors of those to the color card for your kit, and either verify the accuracy of the kit, or use those colors to train yourself to recognize the colors. Your phosphate test kit is now calibrated. You can store the standard solutions in tightly sealed bottles for an indefinite period of time for future calibrations. Ideally, you calibrate the kit each time you use it. Other Test Kits To follow, maybe
__________________
Hoppy
Last edited by Hoppy; 03052009 at 01:45 AM.. Reason: Correct errors 
Sponsored Links  
Advertisement


03042009, 10:17 PM  #2 
Planted Tank Enthusiast

IMO this needs to be a sticky. I would check but I am procrastinating doing homework.
__________________
[SIGPIC][/SIGPIC]

03042009, 10:47 PM  #3 
Algae Grower

[quote=plakat;800312]IMO this needs to be a sticky.
I second the motion 
03042009, 11:18 PM  #4 
Wannabe Guru

Sticky, sticky, sticky  5 stars from me! Excellent work, Hoppy. Now that you've made this so simple, I'm going to have to find something else to do with my digital scale!

03042009, 11:30 PM  #5 
Planted Tank Guru

It's sort of EI for test kit calibration.
Regards, Tom Barr
__________________
Regards,
Tom Barr 
03042009, 11:32 PM  #6 
Planted Tank Guru

I was planning to call it the Julia Child calibration plan.
__________________
Hoppy

03042009, 11:43 PM  #7 
Planted Tank Enthusiast

Nice work. Check the phosphate, it says to add KNO3 not kh2po4 or other compound

03052009, 01:16 AM  #8 
Algae Grower

Thanks
Thanks Hoppy...

03052009, 01:43 AM  #9 
Planted Tank Guru

Thank you! I corrected it.
__________________
Hoppy

03052009, 01:46 AM  #11 
Planted Tank Guru

I ran this through Einstein's Relativity equations, and you are right. So I corrected it.
__________________
Hoppy

03052009, 04:15 AM  #12 
Planted Tank Guru

Yesterday I made some 4 dKH water, using 14 dKH water made from an ampule of lab standard water. When I used my KH test kit to measure the KH of that water, it said 3 dKH. So, that raised a lot of doubts in my mind about the KH test kits. Calibrating that kit is a much harder job. But, it finally occurred to me that I should be able to take advantage of a property of sodium bicarbonate to do that. The property is the solubility of NaHCO3 in water, which varies with temperature. I converted the graph of that solubility to read in solubility of carbonate instead of sodium bicarbonate, getting this graph:
The technique will be to start with distilled water, add a lot of baking soda to that, let it sit quietly on the kitchen counter (where else?) for an hour or so, with only very gentle stirring, to saturate the water with baking soda. It won't matter that my baking soda will contain some water in the crystal structure, since that water just joins the distilled water. Then I use a syringe to get a sample of that water, 1 ml, as closely as I can get, and quickly add it to enough distilled water to end up with 20 dKH water, by calculation. Then dilute that to get my standard solutions. Will this work? I know the saturated solution will be losing CO2 to the atmosphere, but if I do this rapidly I should still have saturated solution being added to the distilled water. Am I missing something? If this will work, it is another way to make 4 dKH drop checker water.
__________________
Hoppy

03052009, 12:00 PM  #13  
Planted Tank Guru

Quote:
Stickified.
__________________
Walter
Visit my 125 profile and gallery or my 5 gallon lowtech. Proud member of: May the floor under your tank always be dry, and your glass clear!!! 

03052009, 11:51 PM  #14 
Planted Tank Guru

Calibrating KH test kit
KH Test Kit
This method, compliments of Cardinal's Keeper (http://www.plantedtank.net/forums/di...solution.html) (Note: You will need a whole gallon of distilled water to do this.) 1. Start with 6 cups of distilled water in a clean measuring container 2. Add 1/8 teaspoon Sodium Bicarbonate (baking soda, freshly opened) to the 6 cups of water and mix 3. Pour out 3 cups of this mix and discard 4. Add back 3 cups of distilled water and mix 5. Pour out 3 cups of this mix and discard 6. Add back 3 cups of distilled water and mix 7. Pour out 1 cup of this mix and discard 8. Add back 1 cup of distilled water and mix 7. Water comes out to a 4 dKH solution 8. To make a 2 dKH solution, mix one cup of the 4 dKH solution with one cup of distilled water. 9. To make a 1 dKH solution, mix one cup of the 2 dKH solution with one cup of distilled water.
__________________
Hoppy
Last edited by Hoppy; 06022012 at 05:22 AM.. Reason: A new method for making a standard KH solution 
03062009, 02:59 AM  #15 
Algae Farmer

Thanks Hoppy,
I appreciate the work you put into this. I don't have an accurate scale to use other described methods, so this is making my day It actually is similar to what I do to add a known amount of Calcium and Magnesium to my water. Eventually I may have done the math myself some day, but now I'll just use your method 
Thread Tools  
Display Modes  

