Calibrating Test Kits - for non-Chemists
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Fertilizers and Water Parameters


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-04-2009, 09:25 PM   #1
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (75/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,911
Default Calibrating Test Kits - for non-Chemists

I received a request to write something like this, so: (I hope someone will check this for accuracy.)

Calibrating Test Kits

Calibrating a test kit means using that kit to measure some water samples with known concentrations of the substance being tested for, and using those test results to verify that the test kit is accurate, or to train yourself to recognize the colors that correspond to the concentrations you want to test for. Hobby test kits are not laboratory quality tests. That means we dont need extreme accuracy in the standard test solutions we use for calibration. If we have a good quality gram scale, with +/-.01 gram accuracy, and good laboratory glass graduated cylinders to measure water volume, there are other articles that tell how to make very accurate standard solutions. The methods described here are for use with ordinary kitchen measuring equipment, measuring spoons and cups. And, the Fertilator calculator on APC was used to easily calculate how to mix these.

Nitrate Test Kits

First, buy a gallon of distilled water from your local grocery store. Use that to make the test standard solutions.

1. Add 1/4 teaspoon - a level measure, not a heaping measure - of KNO3 to 4 cups of distilled water (one quart). This gives you 4 cups of 800 ppm nitrate water.
2. Mix 1/4 cup of that 800 ppm water with 1 3/4 cups of distilled water. This gives you 2 cups of 100 ppm nitrate standard water.
3. Mix one cup of that 100 ppm water with one cup of distilled water. This gives you 2 cups of 50 ppm nitrate standard water.
4. Mix one cup of that 50 ppm water with one cup of distilled water. This gives you 2 cups of 25 ppm nitrate standard water.
5. Mix 1/2 cup of that 25 ppm water with 3/4 cup of distilled water. This gives you 1 1/4 cups of 10 ppm nitrate standard water.
6. Mix 1/4 cup of 25 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 5 ppm nitrate standard water.
7. Use your test kit to measure the nitrate concentration in each of the 5,10,25, and 50 ppm nitrate standards. If you wish, add the 100 ppm standard to that set.
8. Compare the colors of those to the color card for your kit, and either verify the accuracy of the kit, or use those colors to train yourself to recognize the colors.

Your nitrate test kit is now calibrated. You can store the standard solutions in tightly sealed bottles for an indefinite period of time for future calibrations. Ideally, you calibrate the kit each time you use it.

Phosphate Test Kits

First, buy a gallon of distilled water from your local grocery store. Use that to make the test standard solutions.

1. Add 1/4 teaspoon - a level measure, not a heaping measure - of KH2PO4 to 4 cups of distilled water (one quart). This gives you 4 cups of 1000 ppm phosphate water.
2. Mix 1/4 cup of that 1000 ppm water with 2 1/4 cups of distilled water. This gives you 2 1/2 cups of 100 ppm phosphate standard water.
3. Mix one cup of that 100 ppm water with one cup of distilled water. This gives you 2 cups of 50 ppm phosphate standard water.
4. Mix one cup of that 50 ppm water with one cup of distilled water. This gives you 2 cups of 25 ppm phosphate standard water.
5. Mix 1/2 cup of that 25 ppm water with 3/4 cup of distilled water. This gives you 1 1/4 cups of 10 ppm phosphate standard water.
6. Mix 1/4 cup of 25 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 5 ppm phosphate standard water.
7. Mix 1/4 cup of 5 ppm water with 1 cup of distilled water. This gives you 1 1/4 cups of 1 ppm phosphate standard water.
8. Use your test kit to measure the phosphate concentration in each of the 1,5,10, and 25 ppm phosphate standards. If you wish, add the 50 ppm standard to that set.
9. Compare the colors of those to the color card for your kit, and either verify the accuracy of the kit, or use those colors to train yourself to recognize the colors.

Your phosphate test kit is now calibrated. You can store the standard solutions in tightly sealed bottles for an indefinite period of time for future calibrations. Ideally, you calibrate the kit each time you use it.

Other Test Kits

To follow, maybe
__________________
Hoppy

Last edited by Hoppy; 03-05-2009 at 02:45 AM.. Reason: Correct errors
Hoppy is offline   Reply With Quote
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:44 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012