I need advice.
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 03-08-2014, 01:10 AM   #1
new_fish_guy
Algae Grower
 
PTrader: (0/0%)
Join Date: Sep 2013
Location: Okinawa, JP
Posts: 5
Default

I need advice.


Hello all,
I have a problem. Sometime over the last two days I experienced what I believe to be an end of tank dump. I have a do!aqua 35 gram co2 cart system with single stage regulator, solonoid, and diffuser/bubble counter. The diffuser/bubble counter being one unit a glass tube that is filled with water and has a ceramic disk at the top. Co2 bubbles from the bottom through the water and diffuses through the disk. Normally after the co2 is shutoff for a few hours water completely fills the tube and after it is turned on it displaces about a 1/4in of water for a co2 pocket. I found an empty diffuser no water at all and an empty co2 cart. The weird thing is I did not loose fish. When I used to run 1 bps the cart lasted a over a month. I am now running 2bps and I got 3 weeks out of the last cart but I just replaced this one last week. I don't understand what happened. It should be noted that I just found out about end of tank dumps and have been letting my carts run dry.

So my questions are 1 was this a end of tank dump so soon after replacement? 2 how do I prevent this again? 3 do I have a pos co2 system that is a lost cause?

Also I only have a 15 gal tank so I don't need a big co2 system.

Thanks for the help.
new_fish_guy is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 03-08-2014, 10:04 AM   #2
Darkblade48
Moderator
 
Darkblade48's Avatar
 
PTrader: (3/100%)
Join Date: Jan 2008
Location: Toronto
Posts: 9,184
Default

Most likely, you have a leak somewhere when you went to replace your cartridge.

When you replace your cartridge, I would do a leak test with soapy water (just paint it all over the joints to ensure that you are not losing CO2 somewhere).
__________________
Anthony

A Primer to Pressurized CO2 and A Primer to Planted Tanks
Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Eheim 2217, Eheim surface skimmer and Eheim autofeeder.
Victor Pimp #33 - HPT272-125-350-4M
Darkblade48 is offline   Reply With Quote
Old 03-10-2014, 05:39 PM   #3
Guyver
Algae Grower
 
Guyver's Avatar
 
PTrader: (0/0%)
Join Date: Feb 2010
Location: Silverdale, WA
Posts: 117
Default

I emptied my 5# CO2 tank in 3 days because I doubled up on the gaskets between the CO2 tank and the High Pressure Regulator.

Leak check your system! Teflon pipe tape helps between threads as well.
__________________
10 gallon acrylic fw planted. 6 neons, 1 fancy male guppy, RCS, pond snails & MTS, AC50, Current USA Nova Extreme 2x18W T5HO, pressurized CO2.
Guyver is offline   Reply With Quote
Old 03-10-2014, 08:19 PM   #4
exv152
Wannabe Guru
 
exv152's Avatar
 
PTrader: (0/0%)
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 1,282
Default

You'll waste a ton of co2 if you don't do leak tests. Save yourself the time, money and headache, and also, pay very close attention to the way the bubbles react. Sometimes a leak can be absolutely tiny. Barely noticeable.
__________________
Eheim Pimp Club,# 496
25g 60-H iwagumi
125g high tech
7g cube
33g iwagumi cube
75g low tech angelfish tank
exv152 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:07 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012