Fixing my Aquatek Co2 Bubble counter
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 03-08-2014, 05:24 AM   #1
mfurufuru
Planted Member
 
mfurufuru's Avatar
 
PTrader: (2/100%)
Join Date: Mar 2012
Location: oahu
Posts: 243
Smile

Fixing my Aquatek Co2 Bubble counter


Ok so last year I bought the Aquatek Mini Co2 regulator and it has been working fine with my glass diffuser.


However I recently upraded my diffuser to an GLA atomic inline difusser and during the upgrade I managed to break the plastic bubble counter Aquatek gives you with the Mini regulator. I ordered the brass bubble counter from aquatek and tried to install it but it would not fit despite their claims that it will work.
I found that the top of the regulator and the co2 output was too close together and the fit was too tight. The plastic cylinder became scratch from trying to force it and it would not form a seal at all.


I was able to make an extension from parts from home depot.

I used some teflon tape
1/8 in brass pipe connector LFA-717
1/8 in brass pipe coupler LFA-706

I bought the o-ring #247 but didn't really need it.







Tips* When using teflon tape make sure you wrap it atleast 3 times to prevent any leakage.
Also to check for leaks I used some qtip with soap on it and rubbed it against any adjoining pieces.

Hope this helps someone who might be thinking of a similar setup.

Can't say I'm impressed with Aquatek esp. this bubble counter.
The regulator itself seems to work fine.
mfurufuru is online now   Reply With Quote
Sponsored Links
Advertisement
 
Old 03-09-2014, 12:04 AM   #2
prighello
Shrimp Bane
 
prighello's Avatar
 
PTrader: (2/100%)
Join Date: Aug 2007
Location: Napa, Ca
Posts: 486
Default

Great fix, too bad it doesn't fit right out of the box, but you made it work which is what counts.
prighello is offline   Reply With Quote
Old 03-09-2014, 01:37 PM   #3
HUNTER
Wannabe Guru
 
PTrader: (0/0%)
Join Date: Sep 2012
Location: las vegas
Posts: 1,195
Default

I have aquatek mini, but I doubt I'll be buying any of their products when this one putts out.
HUNTER is offline   Reply With Quote
Old 03-10-2014, 01:36 AM   #4
FlyingHellFish
Wannabe Guru
 
FlyingHellFish's Avatar
 
PTrader: (0/0%)
Join Date: Nov 2011
Location: Canada
Posts: 1,918
Default

I think that bubble counter is made for the bigger units. There is a few asian made bubble counters you can get on the'ebay that might fit.

I like your determination,
FlyingHellFish is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:16 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012