125/50 - update June 2014 - Page 7
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Tank Journals


Reply
 
Thread Tools Display Modes
Old 08-28-2013, 07:45 PM   #91
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Ok, white it is! Also, friend of mine came by to advise on the doors. I have a solution, just have to do it.

Essentially going to remove the melamine from the front, cut strips for the outer edges, then cut the large board down into 4 doors to fill the remaining space. A 2x4 or 2x6 will be used as a stile for the center. I have just enough cup hinges (recovered from some old/tossed furniture) and handles to get the job done. Said friend will also bring over some edge banding because anything less is pretty ghetto in his mind.

Oh yeah, also found a local pool store that should have some cutoffs of spa-flex I can take. Hopefully that pans out!
crazymittens is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-28-2013, 08:44 PM   #92
Phil Edwards
Planted Tank Enthusiast
 
Phil Edwards's Avatar
 
PTrader: (1/100%)
Join Date: Jul 2003
Location: Elysburg, PA
Posts: 838
Default

Good luck!
Phil Edwards is offline   Reply With Quote Quick reply to this message
Old 08-30-2013, 01:00 AM   #93
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Ok, moar pics.

Ye olde drille presse
With 1" forstner bit for the cup hinges.


Adding the strips and stile




Stile required some minor material removal


Yes, I will be keeping my day job






Foam mat repurposed
Yay bandsaw making this task super quick!





Preview of the trim




So everything is cut...here's what's next:
  • Trim strips of foam mat to fit
  • Paint trim pieces
  • Paint/caulk stand interior
  • Investigate conduit possibilities for wiring
  • Lower stand to floor, shim
  • Drill tank (set on end)
  • Place tank on stand, begin plumbing game!

Plumbing game will be a lot of fun.


Edit: Ya, I get it. The doors are not level. Why? Because I built the frame/carcass on my garage floor. Said floor is the antithesis of 'level' and 'smooth'. Also...first time. Mostly the floor's fault.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 08-30-2013, 02:28 AM   #94
cableguy69846
Planted Tank Guru
 
cableguy69846's Avatar
 
PTrader: (8/100%)
Join Date: Dec 2010
Location: Chicago, IL
Posts: 4,986
Default

Quote:
Originally Posted by crazymittens View Post
Edit: Ya, I get it. The doors are not level. Why? Because I built the frame/carcass on my garage floor. Said floor is the antithesis of 'level' and 'smooth'. Also...first time. Mostly the floor's fault.
There is a saying in the construction industry.
"Always the tool, never the operator..... Unless the operator is a tool."

You, sir, are no tool. That looks good to me. As for the gap in between the sets of doors, a scrap piece of the same material will take care of that.
__________________
The Fraternity of Dirt #39
Just because its dirt doesn't make it low tech

Cable's Madness
Fish tanks are like cups of coffee, one is never enough.
"What the smeggin smeg's he smeggin' done now?!" - Lister
cableguy69846 is offline   Reply With Quote Quick reply to this message
Old 08-30-2013, 11:45 AM   #95
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Haha, very kind. However, for once I am glad for crappy cellphone pictures. It'll do the job, but lol it's really bad cabinetry. My carpenter buddy is going to have a field day.

Yeah, the real issue with those strips - not that I could think of a better method - is that you have to...hm...just thought of a fix. Essentially they are affixed by wood screws through the 2x4 frame. This was a rather awkward process, and I don't see it holding up over time. I think I'll do screws from the face side and then add some of those Ikea-esque vinyl screw caps.

Anyways...the hard part is done. Will be very glad when paint is done!
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-01-2013, 12:45 AM   #96
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Well, some small progress today. Took most of the afternoon just cleaning up and putting away tools.






Going out there shortly to decide if a 2nd coat is worth it. This is primer/sealer, so really just cosmetic beyond what I've done. Since there are no windows into the sump area, no point in making it perfect.

Also about to leave on vacation for 6 days, so was really hoping to have the stand off the blocks, onto shims, and maybe even have the tank drilled and mounted onto the stand. Hm. We'll see.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 02:42 AM   #97
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Hokey dinah. Water leak test commencing.

Tank on the new stand
You really get a good feel for how it'll look once it's downstairs once it's all put together.



Sumpy!
Sumpy. He fits. Just. Another 1" of width and he'd snug right in - as-is he must be dropped into place. Don't mind the 2x lumber, just temporary for plumbing fitment.



Side view, an idea of the ledge size
I think it's 2" wider than I'd envisioned...but a good and handy size nonetheless.



It begins...
At this point the stereo goes off and my hearing moves into paranoid mode. Also, I discovered that only the ends are being supported!!! The 2x6's apparently have a 1/32" bow in them (totally thought I had the crowns up... :S ).



So fresh and so clear...
Quite impressed with how clear everything is.



Groovy
...man.


Full!
No ominous creaking or cracks...so we'll go with that 1/32" gap will disappear once I get things onto the slab.





We're away this weekend, so hopefully it doesn't explode and ruin my garage. (haha, not like it could get much worse) Sunday evening when we're back I'll do the final measurements for the sump and overflow, Monday get the glass ordered, and then work on drilling/plumbing!

edit: My phone also got stolen/went missing whilst on vacation last week, so new iPhone camera pics for this post! I sense a noticeable improvement in IQ.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 02:42 PM   #98
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Tank hasn't cracked or exploded overnight...but that gap is still there. Guess that foam doesn't compress as much as I'd hoped. I'll be leaving it full until Sunday, then draining for drilling prep.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:32 PM   #99
Phil Edwards
Planted Tank Enthusiast
 
Phil Edwards's Avatar
 
PTrader: (1/100%)
Join Date: Jul 2003
Location: Elysburg, PA
Posts: 838
Default

Looking good! Damn you for making faster progress than me. I'm going to have to get my butt in gear to get planted before you do.
Phil Edwards is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:35 PM   #100
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Haha, well the goal is to have a fully functional plumbing system by end of next weekend...substrate/planting done by the following weekend. GL!

To be honest, I would not rush if all my plants/fish weren't sitting in limbo. So take your time!
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:41 PM   #101
Phil Edwards
Planted Tank Enthusiast
 
Phil Edwards's Avatar
 
PTrader: (1/100%)
Join Date: Jul 2003
Location: Elysburg, PA
Posts: 838
Default

Awww, way to deny my attempt at starting friendly back and forth smack-talk. I'm hurt. I think I'm going to fill my tank with all the tears you're making me cry.

Looking forward to seeing your system up and going.
Phil Edwards is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:44 PM   #102
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

Sorry, I'm Canadian and didn't want to cause unnecessary grief.

Also, let's be honest here, my system is pretty piddly compared to what you have in the works - you'd be doing yourself and everyone drooling after you a disservice by rushing.

TL;DR: I'm going to win this race. Sucka whut.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 05:59 PM   #103
Phil Edwards
Planted Tank Enthusiast
 
Phil Edwards's Avatar
 
PTrader: (1/100%)
Join Date: Jul 2003
Location: Elysburg, PA
Posts: 838
Default

It's ok about being Canadian. Many important people in my life are from that esteemed nation. Plus, my favorite car ever, 2005 Monte Carlo SS, was made in Oshawa so that city has a place in my heart forever.

Yeah, you may win the race but I'm gonna win the...uh, I'm not sure what I'll actually win. Higher hydro bills? More $$ forked out to stock the thing? Super wrinkly arms and hands from the hours needed to trim this beast? Maybe I need a smaller tank.

Oh yeah. Big tanks get the girls. That's it. Yup. "Hey baby, wanna come back to my little house in the country and spend some time in my basement? I've got some AMAZING aquariums. Really. I promise. *cough* It puts the lotion on its back. *cough*"
Phil Edwards is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 06:11 PM   #104
crazymittens
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Jun 2012
Location: Oshawa
Posts: 674
Default

I'll concede to that point. My wife wouldn't approve.

With a tank your size, I could get my son to go swimming for the plant trimming sessions! That's a bonus right there. Any tank that requires swimming trunks for maintenance is win.
crazymittens is offline   Reply With Quote Quick reply to this message
Old 09-13-2013, 08:56 PM   #105
Phil Edwards
Planted Tank Enthusiast
 
Phil Edwards's Avatar
 
PTrader: (1/100%)
Join Date: Jul 2003
Location: Elysburg, PA
Posts: 838
Default

What do I get if I add a snorkel to the swimming trunks?

Other than really wet...
Phil Edwards is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:02 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012