evaluate my steel stand
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


Reply
 
Thread Tools Display Modes
Old 06-21-2013, 10:13 AM   #1
yanzco
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: Philippines
Posts: 49
Default

evaluate my steel stand


hi guys..
just finished painting my new stand for my 100 gal concrete aquarium..

100 gal. water - est. 400 kg
3 inch bottom slab - est. 250 kg
3 inch side slabs - est. 100 kg
12mm glass panels - est. 20 kg
substrate , hardscape - 30kg
est. total weight of 800kg +


i had a stand before made of coco lumber..
but i was doubting it could hold this much weight..
so i made this new stand to make me feel safer..

if there are any engineers here. please evaluate my stand.
if it could hold 1000 kg / 1ton..

i used what available materials i could get in my place
( house undergoing construction )

used 2x2 angle bars 3mm thick and 1x1 angle bars 3mm thick.
some steel tubes.. and some 2mm thick square bar..
and some c puline like bar.. thou i do not know what it's name is..




and heres a rough diagram in paint on how i planned it.
(forgive my paint skills)



stand dimensions are..

length 57 inches
width of 25 inches
height of 43 inches
yanzco is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-22-2013, 02:42 AM   #2
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (75/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,975
Default

I believe the tank will be supported almost entirely by the 4 corners, so the middle of the tank might tend to deflect excessively. The highest loads appear to be on the upper, front and back horizontal angles across the length of the tank - in tension; in the middle front and back horizontal angles across the length of the tank - in bending; and the 4 legs where the middle horizontal angles across the length of the tank attach - in bending. But I made no effort to calculate those loads, since I have no idea what the strength of the steel parts is.
__________________
Hoppy
Hoppy is offline   Reply With Quote Quick reply to this message
Old 06-22-2013, 04:02 AM   #3
yanzco
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: Philippines
Posts: 49
Default

thanks !!
well. im quite confident it could take 800+kg..
hope im not wrong..

here's the stand with the tank on top..
took 6 guys to transfer the tank from the previous stand to the new one..

placed 3/4 marine plywood at the bottom coated with marine epoxy for extra strength..

yanzco is offline   Reply With Quote Quick reply to this message
Old 06-22-2013, 06:18 AM   #4
Hoppy
Planted Tank Guru
 
Hoppy's Avatar
 
PTrader: (75/100%)
Join Date: Dec 2005
Location: Sacramento, CA
Posts: 18,975
Default

It would really be interesting to read how you made that concrete tank. I assume you have some reinforcing steel in the concrete?
__________________
Hoppy
Hoppy is offline   Reply With Quote Quick reply to this message
Old 06-22-2013, 08:04 AM   #5
yanzco
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: Philippines
Posts: 49
Default

yep, used 10mm rebars for the bottom and side slabs..

heres my tank journal..
http://www.plantedtank.net/forums/sh...d.php?t=344514
thou still an ongoing project.. hehe :p
yanzco is offline   Reply With Quote Quick reply to this message
Old 06-25-2013, 12:07 PM   #6
Mxx
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Dec 2010
Location: London
Posts: 577
Default

What is it that you were looking to have the stand structurally evaluated for? For it to double as a bomb shelter?? Or to serve as a bridge for heavy vehicles??

I'm not an engineer, but it certainly looks more than sufficient, judging by comparing it to other tanks and stands. I couldn't grasp why you were planning to use 3" slabs at the bottom and sides until you posted the picture which shows those made of concrete rather than glass!...
Mxx is offline   Reply With Quote Quick reply to this message
Old 06-25-2013, 08:26 PM   #7
nanous
Planted Member
 
nanous's Avatar
 
PTrader: (4/100%)
Join Date: Mar 2013
Location: Anares
Posts: 158
Default

this [censored][censored][censored][censored]ing rules you're a mad genius
nanous is offline   Reply With Quote Quick reply to this message
Old 06-26-2013, 01:56 AM   #8
yanzco
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: Philippines
Posts: 49
Default

i was haveing doubts if it could carry 1000kg load..
but, having placed the tank on top. i thought, maybe this is strong enough..

i placed ashlar stones for the exterior, and those were really heavy.. 8 pcs of 4"x8" ashlar stones needs both of my hands to carry them and slouching a bit from the weight..

@Mxx, i actually copied a bit of the design from a bridge... hehe..


hehe..

Last edited by yanzco; 06-26-2013 at 02:13 AM.. Reason: added info
yanzco is offline   Reply With Quote Quick reply to this message
Old 06-26-2013, 02:02 PM   #9
Mxx
Planted Tank Enthusiast
 
PTrader: (0/0%)
Join Date: Dec 2010
Location: London
Posts: 577
Default

Yeah, pretty sure it could withstand a direct mortar attack. And not only can it be a tank itself, you could turn it upside down and use it to stop tanks as well!
http://rotr.swr-productions.com/imag...U_TankTrap.jpg
Mxx is offline   Reply With Quote Quick reply to this message
Old 06-26-2013, 05:14 PM   #10
etk300ex
Algae Grower
 
etk300ex's Avatar
 
PTrader: (0/0%)
Join Date: May 2013
Location: Rochester NY
Posts: 137
Default

I would of went with some 1.25 or 1.5, .120 wall square tube in place of the 2x2. Triangulation looks good. Hope you burned the crap out of those welds . Its probably OK, I guess I tend to overbuild.
__________________
75G; DIY turtle top, Zilla T5/halogen combo, Sunsun 302, Skim350, Aqueon pro, Saftsorb
50G; Aquasun 2xT5HO, Sunsun 302, Aqueon pro, Aquatek CO2 reg, UP aqua atomizer, Saftsorb
etk300ex is offline   Reply With Quote Quick reply to this message
Old 06-27-2013, 01:21 AM   #11
yanzco
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: Philippines
Posts: 49
Default

yep.. used 2kilo of welding rods to weld all this together.. hehe..
i think angle bars are more solid than square tubes.. since angle bars are solid, and the square tubes are rolled and welded together.. but yeah, as long as it's welded all together fine.. it'll hold..

with the tank canopy, and exterior stones, plus the sump gravels and water..

it's okay to overbuild, it takes away your 'worry-ing'..
__________________
My Tank -> clicky clicky...
yanzco is offline   Reply With Quote Quick reply to this message
Old 06-27-2013, 02:42 AM   #12
Rodneywt1180b
Algae Grower
 
PTrader: (0/0%)
Join Date: Jun 2013
Location: Centralia, WA, USA
Posts: 56
Default

Please keep us posted on your progress. That is one awesome looking tank.
Rodney
Rodneywt1180b is offline   Reply With Quote Quick reply to this message
Old 06-27-2013, 02:11 PM   #13
etk300ex
Algae Grower
 
etk300ex's Avatar
 
PTrader: (0/0%)
Join Date: May 2013
Location: Rochester NY
Posts: 137
Default

Angle iron is also "rolled". Square of same thickness for simple purposes is twice as strong as angle, how much depending on its construction (CREW, HREW, DOM).
__________________
75G; DIY turtle top, Zilla T5/halogen combo, Sunsun 302, Skim350, Aqueon pro, Saftsorb
50G; Aquasun 2xT5HO, Sunsun 302, Aqueon pro, Aquatek CO2 reg, UP aqua atomizer, Saftsorb
etk300ex is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:07 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012