Hamburger Mattenfilter for a low tech setup - Page 34
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > General Planted Tank Forums > Low Tech Forum


Reply
 
Thread Tools Display Modes
Old 05-26-2013, 02:24 AM   #496
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

One more question on this filter setup. I would like to immitate that corner mount that Hoppy posted. Is that too much flow for shrimp like that or is the spray bar the better way to go to be able to reduce the current?

I am torn between corner mount, back, and the end positions. Want to make sure that the current keeps the mosses clear, but not blowing the shrimp around like debris.

Thoughts?
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-29-2013, 03:50 AM   #497
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

Bumpity bump
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Old 05-29-2013, 06:13 AM   #498
oliverpool
Algae Grower
 
PTrader: (0/0%)
Join Date: Jul 2011
Location: Singapore
Posts: 23
Default

I have one side mounted unit which I have tried running at 2 to 4 times water turnover. I believe as long as your outlet it high up from just below to at the water level, the flow in the tank is not going to be really bad. Most hob or canister filter are going to be much much stronger. Get a adjustable water pump so that you can adjust the flow between 2-4 times your requirement and you should be fine, The suction on the sponge is also going to be so weak that I doubt any young shrimp is going to be stuck on the sponge from the suction power due to the large surface area.
oliverpool is offline   Reply With Quote Quick reply to this message
Old 05-29-2013, 06:42 AM   #499
dprais1
Planted Tank Enthusiast
 
PTrader: (13/100%)
Join Date: Sep 2012
Location: mt prospect
Posts: 908
Default

Quote:
Originally Posted by astex View Post
Yeah, I bought the jet lifters for convenience, but they really are just nice PVC (a bit thinner than your average PVC though). I think the key is that they turn and poke through the foam wall. I'm thinking a small desk-fountain type pump for behind the foam (if you don't want to do the air powered) and then a circulation outside would work for you. Good luck!
I believe the advantage of the jetlifter is that it uses curved part rather than a 90 degree elbow to maximize flow. not that you couldn't do it yourself....
__________________
20L My Other Tank: OEBT Shrimp
40B Inlaws Tank: 2 goldfish
75 Main Tank w/ sump: 5 Glossolepis pseudoincisus, 5 Melanotaenia boesemani, 10 Melanotaenia praecox, 5 Melanotaenia lacustris, some cories, a bn pleco and rainbow fish fry
dprais1 is offline   Reply With Quote Quick reply to this message
Old 05-29-2013, 03:39 PM   #500
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

It really comes down to placement for me. I can follow hoppy and sewingings instructions for drilling holes slowly to get the flow levels I want, but was curious how the single tube flow rate was.

I bought a non adjustable rio 450 based on recomendations, so I think the bar is my method of choice now.

Now I just gotta decide on end of tank with spray bar above, or corner with spraybar on the end. I have a beautiful chunk of dw I am soaking, but it takes up alot of space so may have to trim it to fit, just dont know how much room this filter will take. Still waiting on the poret to show up... must be pony express...
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Old 05-29-2013, 03:57 PM   #501
waterfaller1
Planted Tank Guru
 
waterfaller1's Avatar
 
PTrader: (70/100%)
Join Date: Jul 2006
Location: Florida
Posts: 5,303
Send a message via AIM to waterfaller1
Default

Quote:
Originally Posted by plantbrain View Post
Sumps stink for shrimp since they get in there and into the overflows.
Not if you use a filter sock. I can't tell you how many times I have fished my kuhli loaches from the sock in the sump until they were too big to slide through the grooves in the overflow.
waterfaller1 is offline   Reply With Quote Quick reply to this message
Old 06-12-2013, 05:10 PM   #502
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

Ok, stand built, check
Poret and pump on workbench check.
Coffee with extra um.. flavor check.
How to put this dang foam in the tank...

How did you folks keeping shrimp with these, keep shrimp from entering "over" the foam?

Think I will hold off one more work trip to do this part and draw up ideas.. darned wood is not sinking still...

Any artisans that wanna share some sketch ideas of how to "contain" the foam, please do.

Gonna pick up some acrylic and pvc this afternoon hopefully
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Old 06-14-2013, 04:39 PM   #503
somewhatshocked
Obsessed? Maybe
 
somewhatshocked's Avatar
 
PTrader: (438/100%)
Join Date: Aug 2011
Location: Louisville, KY
Posts: 11,527
Default

Actually think all of those questions were addressed in this thread.

There are several photos and explanations about how to contain the foam.
somewhatshocked is offline   Reply With Quote Quick reply to this message
Old 06-14-2013, 06:21 PM   #504
BeastMaster
Darth Rimless
 
BeastMaster's Avatar
 
PTrader: (1/100%)
Join Date: Dec 2012
Location: Honolulu, Hawaii
Posts: 620
Default

Here's my version of the Mattenfilter for a DBP "5B" 3.2gal tank. I didn't want to sacrifice space for an internal filter and I had all this extra glass (4 dividers & top) so, I built a glass sump and used a Rio+ 90 powerhead to create flow. The flow is directed by Fischer Chem 9mm lily pipes and (3) Fluval foam pads were used as filtering media. As an added touch, I placed a few Hemianthus glomeratus cuttings inbetween the foam pads at the surface to experiment with emergent growth.
Attached Thumbnails
Click image for larger version

Name:	IMG_1449.jpg
Views:	100
Size:	53.6 KB
ID:	159073  

Click image for larger version

Name:	IMG_1450.jpg
Views:	66
Size:	63.0 KB
ID:	159081  

Click image for larger version

Name:	IMG_1451.jpg
Views:	98
Size:	84.1 KB
ID:	159089  

__________________
Eheim Pimp #540 Finnex Member #11 ADA Gentleman #6 60F Club 12G Club 60P Club BeastMaster Project Tanks
BeastMaster is online now   Reply With Quote Quick reply to this message
Old 06-14-2013, 10:47 PM   #505
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

Yeah, there are alot of posts about the sides, for bending it for corners and such, and Hoppy showed his cool stand to keep the sand from going under it, but nothing addresses the over the top portion.

Thanks for the idea on the add on, unfortunately the stand is built already and I am limited to in tank design now.

Think I'll just try my hand at the acrylic and see what i can come up with. Will take some pics to add though.
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Old 06-15-2013, 08:01 PM   #506
astex
Algae Grower
 
PTrader: (3/100%)
Join Date: Aug 2009
Location: League City, Texas
Posts: 61
Default

My tank has glass tops, so I just cut another piece of foam, put it on top of the filter foam and it smishes up against the glass. It's not pretty but it works. When I take down these tanks (temp only) and re-set them up again I'll probably do something similar and/or get a strip of acrylic along the top to serve the same function.
astex is offline   Reply With Quote Quick reply to this message
Old 06-16-2013, 05:21 AM   #507
JoeandCarrie
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2012
Location: Cheyenne, Wyoming
Posts: 97
Default

thats kinda what I am thinking. Gonna play with some really thin plexi sheets and see what I can come up with. Will take some pics for the progress.

thanks for the ideas
JoeandCarrie is offline   Reply With Quote Quick reply to this message
Old 02-08-2014, 04:13 PM   #508
newbieplanter
Planted Tank Enthusiast
 
PTrader: (27/100%)
Join Date: Jan 2013
Location: Boston ma
Posts: 722
Default

Pretty neat idea here
Saw it on u tube but never thought it can be used for a planted.

Last edited by newbieplanter; 04-19-2014 at 05:16 PM.. Reason: Added
newbieplanter is offline   Reply With Quote Quick reply to this message
Old 04-19-2014, 11:21 AM   #509
harsaphes
Algae Grower
 
PTrader: (0/0%)
Join Date: Oct 2005
Location: new york city
Posts: 68
Default

Great idea. I can't wait to use this on a tank.
Also the link mentioned in the beginning of the thread has great info.
http://www.angelsplus.com/Filters.htm
__________________
Be Happy.
harsaphes is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:42 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012