UV Sterilizer with Inline CO2 Reg?
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > Equipment


Reply
 
Thread Tools Display Modes
Old 08-25-2012, 06:14 PM   #1
503aqua
Algae Grower
 
503aqua's Avatar
 
PTrader: (4/100%)
Join Date: Aug 2012
Location: Corvallis Oregon
Posts: 93
Default

UV Sterilizer with Inline CO2 Reg?


Hey guys, about to set up my tank and had a few questions. So I recently got a fluval 406 and heard great reviews on it. I know that they aren't always correct but I believe it has a flow rate of around 383 gph.. I have a UV sterilzer gamma 15w by current usa and plan on doing a inline diy co2 reactor. Anyone feel having both these inline will significantly compromise my flow? Which one should I go for then and what are my options if both wouldn't work? I've thought I could hook the co2 to a powerhead and still maintain my flow and get average bubble break up? Also anyone ever do inline with a fluval 406 and what were your results?? Thanks for the info and the links are below for help:

http://www.google.com/imgres?um=1&hl...,r:8,s:0,i:101

http://www.aquaticquotient.com/forum...worth-the-risk
503aqua is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-25-2012, 09:57 PM   #2
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

Should not be a problem. I would suggest running the inline co2 diffuser after the uv sterilizer. That is how I have it on my tank
__________________
Eheim pimp #517

Eheim 2126 thermofilter


http://www.plantedtank.net/forums/sh...d.php?t=187678
Jmlampert23 is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 11:14 AM   #3
503aqua
Algae Grower
 
503aqua's Avatar
 
PTrader: (4/100%)
Join Date: Aug 2012
Location: Corvallis Oregon
Posts: 93
Default

Do you have a canister filter? Have you experienced any loss in flow? Thanks for the info and definitely set up the regulator after the sterilzer. Do you guys like that regulator? The forum seemed pretty great
503aqua is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 11:15 AM   #4
503aqua
Algae Grower
 
503aqua's Avatar
 
PTrader: (4/100%)
Join Date: Aug 2012
Location: Corvallis Oregon
Posts: 93
Default

*just saw your eheim..
503aqua is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 12:14 PM   #5
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

You might see a little reduction of flow but every filter is different and every uv sterilizer is different. Which sterilizer do you have?
__________________
Eheim pimp #517

Eheim 2126 thermofilter


http://www.plantedtank.net/forums/sh...d.php?t=187678
Jmlampert23 is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 07:13 PM   #6
503aqua
Algae Grower
 
503aqua's Avatar
 
PTrader: (4/100%)
Join Date: Aug 2012
Location: Corvallis Oregon
Posts: 93
Default

I have a gamma 15w uv sterilizer. I like the help it offers for borderline cleanliness of the water and pathogens. Definitely keeping ei dosing and water changes/lighting and co2 balanced is key but hope this will be great. Thanks
503aqua is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 08:25 PM   #7
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

you should not have many problems. if you want you can run the uv sterilizer with its own power head i believe if you are worried about flow on your filter
__________________
Eheim pimp #517

Eheim 2126 thermofilter


http://www.plantedtank.net/forums/sh...d.php?t=187678
Jmlampert23 is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 11:03 PM   #8
503aqua
Algae Grower
 
503aqua's Avatar
 
PTrader: (4/100%)
Join Date: Aug 2012
Location: Corvallis Oregon
Posts: 93
Default

Within the tank? I have a hydor koralia and a maxi jet 900.. What are you referring to? I believe the uv sterilizers have to be inline correct? Thanks for the info.
503aqua is offline   Reply With Quote Quick reply to this message
Old 08-27-2012, 11:17 PM   #9
Jmlampert23
Algae Grower
 
PTrader: (1/100%)
Join Date: Jul 2012
Location: Boston MA
Posts: 110
Default

You could buy some tubing and a power head and run it inline off of one of the power heads.
__________________
Eheim pimp #517

Eheim 2126 thermofilter


http://www.plantedtank.net/forums/sh...d.php?t=187678
Jmlampert23 is offline   Reply With Quote Quick reply to this message
Old 08-28-2012, 12:54 AM   #10
accordztech
Wannabe Guru
 
PTrader: (4/100%)
Join Date: Dec 2004
Posts: 1,797
Default

I have a eheim and a uv with a inline co2 reactor. I noticed a little loss in flow but not much. But I did build my regulator with as little bends as possible. You can also run the UV as a bypass. basically the line going up and out to the tank, you put a valve on it. Then you put a Tee before and after the valve (going to and from the UV unit). That way when you want to use the UV you turn the valve off, and the water flow is forced into the UV.
__________________
accordztech is offline   Reply With Quote Quick reply to this message
Old 05-20-2013, 02:03 AM   #11
rbtmccord
Algae Grower
 
PTrader: (0/0%)
Join Date: May 2013
Location: United States
Posts: 99
Default UV in Freshwater Planted tank

I am about to start a Nuvo 16 Planted tank and it has a pump in chmber 2 that y's into two return lines. I am considering injecting CO2 on one return and running the UV sterilizer on the other one. What are your thoughts about that setup?
rbtmccord is offline   Reply With Quote Quick reply to this message
Old 05-20-2013, 02:49 PM   #12
WheeledGoat
Planted Tank Obsessed
 
WheeledGoat's Avatar
 
PTrader: (1/100%)
Join Date: Mar 2013
Location: Chicago
Posts: 324
Default

Quote:
Originally Posted by rbtmccord View Post
I am about to start a Nuvo 16 Planted tank and it has a pump in chmber 2 that y's into two return lines. I am considering injecting CO2 on one return and running the UV sterilizer on the other one. What are your thoughts about that setup?

i was about to make a comment to the OP regarding this very thing.

while your flow will take a bit of a hit with the inline components, the 406 will handle it just fine.

you may, however, still have flow that's too high for the UV light to do too much good. the flow needs to be slow enough that the UV light has time to do its thing. if water's flowing too quickly through it, it won't work. I'd suggest building a PVC manifold for parallel flow (or you could do it using a y-site and tubing), where 50% of the water flows through the UV light and 50% flows through the co2 reactor. this will keep the flow slow enough for good UV light treatment, and will also reduce flow resistance (as compared to the setup being wholely in series).
WheeledGoat is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:24 AM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012