Plumbing a Portable UV Sterilizer
Planted Tank Forums
Your Tanks Image Hosting *Tank Tracker * Plant Profiles Fish Profiles Planted Tank Guide Photo Gallery Articles

Go Back   The Planted Tank Forum > Specific Aspects of a Planted Tank > DIY


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-10-2006, 07:07 AM   #1
DiabloCanine
Everyone has an opinion
 
DiabloCanine's Avatar
 
PTrader: (88/100%)
Join Date: Aug 2005
Location: Greenwood
Posts: 1,676
Default Plumbing a Portable UV Sterilizer

Received some PMs on how I built my Portable UV Sterilizer. It has been modified a little since my last post, here is how I did it:

Parts List:

3/4" schedule 40 pvc about 18"

5/8" tubing about 2"

(2) 3/4" threaded coupling

(4) 3/4" 90 degree pvc fittings

(1) 5/8" x 3/4" nylon barb to MIP adapter

(2) 3/4" unions

(1) Maxi jet 400 powerhead

(1) plastic tie wrap

All purpose cement for pvc, abs, and cpvc


Completed and hanging on 10 gallon tank


Input side disconnected at union


Input side disconnected at union (different angle)


Return side disconnected at union


Sterilizer disconnected at union


Assembled unit


Assembled unit (different angle)


Assembled unit (different angle)


Assembled unit (different angle)

Building tips:

Test fit the assembly before gluing to ensure it fits over the rim of your tanks.

Use a lot of teflon tape at the threaded coupling to sterilizer connection (pic 5). Leak test in an area that can have water spilled. Mine leaked several times until I built up enough teflon tape. Another option is using 5/8" tubing with 2 more 5/8" x 3/4" nylon barb to MIP adapters (I did this on my first attempt but opted to hard plumb it). Here are some a pics showing the tubing option installed.






Now look back at the first pic in the thread to see the difference.

The unions are only necessary if you choose the hard plumbing option. You will need the movement the unions offer when you take the unit apart for cleaning, etc. Without the unions the plumbing might not line up the way it came apart since it is all glued together. If you use the tubing option, it will rotate if needed so the unions are not necessary.

Make the length of pvc that is in the tank as short as possible. The reason I modified my origional is beacuse it was too long; it tore up the substrate when used on my 10 gallon tanks.

Cut 2" pvc pieces for all connections except the return which is 5.5".

Tie wrap the connection between the powerhead and 5/8" tubing.

A tupperware bread box (stolen from my wife) makes the perfect storage container.


Let me know if I left anything out....DC
DiabloCanine is offline   Reply With Quote
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the The Planted Tank Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:03 PM.


Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright Planted Tank LLC 2012