| Your Tanks |  |
Image Hosting | |
*Tank Tracker * | |
Plant Profiles | |
Fish Profiles | |
Planted Tank Guide | |
Photo Gallery | |
Articles |
|
|
|
|||||||||||||||
|
||||||||||||||||
03-05-2013, 08:53 AM
|
#1 |
|
Planted Member
|
What dose this mean? Filter tube
I have a Tetra Ex700 (canister filter), I just purchased a spare canister tube which has it specs. Was wondering what 11.3mm? Is it inner or outer diameter?
 If you know the specs because I want to buy a cheaper brand. |
|
|
| Sponsored Links | |||
Advertisement | |||
|
03-05-2013, 09:35 AM
|
#2 |
|
Moderator
|
I'm not quite sure what you are asking - you have a canister filter, and you have the tubing, but you still want to know the diameter? You can check with a ruler or a set of calipers...
I believe the 11.3 mm measurement refers to the inner diameter. The outer diameter is probably closer to 16 mm.
__________________
Anthony
A Primer to Pressurized CO2 and A Primer to Planted Tanks Eheim Pimp #362 - Eheim 2213 x2, Eheim 2028, Ehein 2217, Eheim surface skimmer and Eheim autofeeder. Victor Pimp #33 - HPT272-125-350-4M |
|
|
|
03-05-2013, 11:20 AM
|
#3 |
|
Planted Member
|
Re: What dose this mean? Filter tube
You have put me to shame, spent an hour looking for the specs and haven't thought of using a ruler. :banghead: My laziness has made it a habit to check online instead of using a practical method. Cant read an exact but estimate is11.3mm for the inner diameter and 16mm for the outer diameter.
|
|
|
|
|
03-05-2013, 11:50 AM
|
#4 |
|
Planted Tank Enthusiast
|
Yeah, inner measurements
__________________
1x 180g - 1x 75g - 4x 55g - 1x 29g - 1x 20g - 1x 15g
Geo's - Cory's - Loaches - Ram's - Firemouths - Convicts - Endlers - Tetras - Plants - Jack Dempsey's - Shrimp |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
